by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet STRETCHLON 200
Bagging film with the high elongation
DESCRIPTION
Stretchlon 200 vacuum bag film is a high elongation elastomeric film which can be used for cures up to 250 F
(121 C) and debulking operations. When parts with multiple contours are vacuum bagged, Stretchlon 200 is an
excellent choice as the high elongation will stretch into complex features. This film is not affected by low
humidity environment. It is recommended for cures with epoxy and phenolic resins.
@ BENEFITS
+ Save time bagging with less pleating, as film stretches over complex shapes.
+ High elongation reduces bridging in corners and rework due to low pressure.
+ Unaffected by low humidity, film is always in good condition.
@ ~ TECHNICAL DATA
Test method
Material type Thermoplastic elastomer
Elongation at break 500 % ASTM D 882
Tensile strength 8000 psi (55 MPa) ASTM D 882
Maximum use temperature 250 F (121 C)
Materials to avoid Bismaleimide (BMI)/ Polyester and vinyl ester
Color Green
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Weight/Roll | __Forms Available
0.0015 inch (38 jum) 60 inches (1.52 m) 2000 feet (610m) 86 Ibs (39 kg) SHT
0.0015 inch (38 um) 120 inches (3.05 m) 1000 feet (305m) 86 lbs (39kg) CF to 60 inches (1.52 m)
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
NOTES
+ Sale and use of the product covered by US Patent No. 5123985.
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a demo video of Stretchlon 200 in the "Media Center" on our website.
Last updated : 2020-05-26
Catalog position : Bagging films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altech ternational nc does ot sme any espns fe the performance of his material fo any parca ue. The mater is sld"s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail : airtech@airtech.com
#’ los Huntington Beach Fax: +1 714-899-8179 Website : wwwairtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet STRETCHLON 200
Bagging film with the high elongation
fi DESCRIPTION
Stretchlon 200 vacuum bag film is a high elongation elastomeric film which can be used for cures up to 250 F
(121 C) and debulking operations. When parts with multiple contours are vacuum bagged, Stretchlon 200 is an
excellent choice as the high elongation will stretch into complex features. This film is not affected by low
humidity environment. It is recommended for cures with epoxy and phenolic resins.
BENEFITS
+ Save time bagging with less pleating, as film stretches over complex shapes.
+ High elongation reduces bridging in corners and rework due to low pressure.
+ Unaffected by low humidity, film is always in good condition.
TECHNICAL DATA
Test method
Material type Thermoplastic elastomer
Elongation at break 500 % ASTM D 882
Tensile strength 8000 psi (55 MPa) ASTM D 882
Maximum use temperature _250 F (121 C)
Materials to avoid Bismaleimide (BMI)/ Polyester and vinyl ester
Color Green
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
SIZES
Weight/Roll | Forms Available
0.0015 inch (38 um) 60inches(1.52m) 2000 feet(610m) 86 Ibs (39 kg) SHT
0.0015 inch (38 um) 120 inches (3.05 m) 1000feet(305m) 86 lbs(39kg) CF to 60 inches (1.52 m)
+ Custom shapes and sizes are available, please contact Airtech for more information.
~< Slit
4 Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
lM NOTES
+ Sale and use of the product covered by US Patent No. 5123985.
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a demo video of Stretchlon 200 in the "Media Center" on our website.
Last updated : 2020-05-26
Catalog position : Bagging films A
sth condtions or mahods of ue nog serge, me beyond or contro Anach nematodes et au ry eponsity fr th paren of mater ry prc we. The mati ld"
inch htemalonal ie dscns and bye wanes oy an a np wares incidg wihout braaton he mpted wean meray ad of incr prc se, The haermaton coneed Pern
Tepes pil popes nd sho! ot be sed for spctcton purposes. ry tandatlon is provided fr you convenence ny. The ical language kngith andthe eal aw casera USK.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
RS 200
SEALANT TAPE
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS RS200_02.21_Issue1
RS 200
Sealant tape
Ideally suited to aerospace applications
Features and Benefits
Developed for use in composite and metal bond
fabrication.
Provides maximum bag sealing security on
aluminium, steel, fibreglass, nickel and graphite tool
surfaces.
Excellent for bag sealing epoxies, polyesters,
phenolics and other adhesives and prepregs at
temperatures ranging from 82 to 204 C (180 F to
400 F).
Strips easily and cleanly from the tool surfaces after
cure.
PRODUCT VARIANTS
Also available RS220, which works in extended cures
PROPERTIES
Maximum cure temperature 204 C 400 F
Color Grey
AVAILABILITY
Roll size 7.6m x 12.7mm x 3.2mm 25ft x 0.5in x 0.125in
Standard box contents 40 rolls per box
STORAGE
Must be stored in its original containers, below 27 C (81 F) and allowed to return to room temperature before use.
Material has a 12 month shelf life from date of manufacture.
Must be stored flat.
Boxes should be stacked no more than 5 high.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
DESCRIPTION
Various infusion tube fittings are available to connect tubes and valves to control resin flow.
TECHNICAL DATA
Nylon fittings
Material type Nylon
Maximum use temperature 356 F (180 C)
Color Translucent
Infusion valve
Material type Polypropylene
Maximum use temperature 248 F (120 C)
Color Black
SIZES
Connector Type Part Name Works with:
Nylon barb “T” fitting NTF3/8 3/8″ I.D. tubing
NTF1/2 1/2″ I.D. tubing
NTF5/8 5/8″ I.D. tubing
Nylon barb “Elbow” fittings NEF3/8 3/8″ I.D. tubing
NEF1/2 1/2″ I.D. tubing
NEF5/8 5/8″ I.D. tubing
Nylon barb “Coupling” fittings NCF3/8 3/8″ I.D. tubing
NCF1/2 1/2″ I.D. tubing
NCF5/8 5/8″ I.D. tubing
Infusion Valve Infusion Valve 1/2 3/8″ I.D. tubing
Infusion Valve 5/8 1/2″ I.D. tubing
NOTES
The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Infusion tube fittings
5700 Skylab Road
Huntington Beach
CA 92647 USA
Phone: +1 714-899-8100
Fax: + 1 714-899-8179
E-mail: airtech@airtech.com
Website: www.airtech.com
Data Sheet
INFUSION TUBING CONNECTORS & VALVES
Last updated : 2023-10-17
Catalog position : Resin infusion products
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold “as is”. Airtech International, Inc.
disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for
specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet INFUSION TUBING CONNECTORS & VALVES
Infusion tube fittings
lM DESCRIPTION
Various infusion tube fittings are available to connect tubes and valves to control resin flow.
M@ TECHNICAL DATA
Nylon fittings
Material type Nylon
Maximum use temperature 356 F (180 C)
Colour Translucent
Infusion valve
Material type Polypropylene
Maximum use temperature 248 F (120 C)
Colour Black
lM SIZES
Connector Type
Nylon barb “T” fitting NTF3/8 3/8″ |.D. tubing
NTF1/2 1/2″ |.D. tubing
NTF5/8 5/8″ |.D. tubing
Nylon barb “Elbow” fittings NEF3/8 3/8″ |.D. tubing
NEF1/2 1/2″ |.D. tubing
NEF5/8 5/8″ .D. tubing
Nylon barb “Coupling” fittings NCF3/8. 3/8″ |.D. tubing
NCF1/2 1/2″ |.D. tubing
NCF5/8 5/8″ |.D. tubing
Infusion Valve Infusion Valve 1/2 3/8″ |.D. tubing
Infusion Valve 5/8 1/2″ |.D. tubing
ap _
–
Infusion Valve Coupling “T” Fitting Elbow Fitting
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2023-10-17
Catalog position : Resin infusion products 4
at emt orth i cig rn on Aichi doe nr egy thon ftir iy prereset be 4
by | Sep 27, 2025
AIRTECH 5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a = Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
RESIN INFUSION STARTER KIT
Starter kit for resin infusion technology
DESCRIPTION
The resin infusion starter kit is made for beginners in the resin infusion technology. All necessary materials are
included, excluding a vacuum pump. The resin infusion starter kit will enable you to make your first composite
part using the resin infusion technology in a short period of time. The provided material will allow you to make a
part superior to 2 sqm.
Please visit the Media Center on www.airtech.com for working instructions and details.
1 RB 451 Vacuum reservoir 1
2 1/2″ Polyethylene tubing Tubing 50 ft (25 m)
3 1/2″ Polyethylene spiral tubing Spiral tubing 50 ft (25 m)
4 OF 625V Resin infusion line 10 ft (3 m)
5 NTF-38 3/8″ x 3/8″ Nylon barb “T” fittings 6
6 NEF-38 3/8″ x 3/8″ Nylon barb elbow fittings 6
7 Greenflow 75 Resin distribution medium 41″x20′
8 Tac-Strip Adhesive coated fiberglass tape Troll
9 KM 1300 Vacuum bagging film 0.002″ x 60″ x 20′
10 Bleeder Lease B Release coated peel ply 60″ x 15′
11 AT-200Y Vacuum bag sealant tape 6 rolls
12 Econobreaker 2R 1″ wide hold down tape Troll
13 Airhold 10 CBS 1″ wide double back tape Troll
14 Resin Line Clamps Resin feed line clamp 3
15 RIC12 1/2″ resin infusion connector 1
16 5 gallon (10 liter) pail Resin reservoir 1
AIRTEC!
– sua ( :
ae
: TCO,
Last updated : 2021-09-27
Catalog position : Resin infusion products
“ech atonal re srs sd ge Vacs on scalps rere eg wtout intone mpl worn ef mccbortaoy sce foes fpr tse Te donation cured Rc
represents pil properties and should not be aed for spetication purposes. Any Wanton provided fo your convenience ony, Te of language’s Eglh andthe ofl lw Calor, USA
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
y al la Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. (CA92647 USA
0% RIC 34
Data Sheet OS t RIC
Resin infusion connector
DESCRIPTION
The Airtech Resin infusion connector (RIC) provides inexpensive and efficient through bag connection for
vacuum manifold and resin feed lines for low temperature resin infusion applications.
i sOBENEFITS
+ Saves time connecting poly tubing to vacuum bags.
+ Avoid quality problems due to vacuum bag leakage at pipe connections.
+ Simple design works for resin fed spirals and on vacuum spiral lines.
fi TECHNICAL DATA
Material type Polyethylene UHMW
Maximum use temperature 176 F (80 C)
Color White
SIZES
Spiral tube connection
RIC 12 1/2 inch (13 mm) 1/2 inch (13 mm)
RIC 58 5/8 inch (16 mm) 5/8 inch (16 mm)
(Ric 34) 3/4 inch (19 mm) 3/4inch(19mm) 3
: airtel
y aire
aint
Mi NOTES
+ Select RIC to fit tube and spiral employed and position as desired, then complete vacuum bag.
+ Cut polyethylene tube on angle and apply wrap of vacuum sealant tape above cut.
+ Smooth bag film over RIC and pierce film with angled tube until vacuum sealant seals connection.
+The maximum use temperature is dependent upon the duration at maximum temperature and
is process specific, Airtech recommends testing prior to use.
Last updated : 2021-07-29
Catalog position : Resin infusion products a
athe conditions ormethods of use nding storage ae beyond our contol itch Intemational in docs ot sume ay responsi fr he pedomnance of his mater foray pars se The mates lds
aitecn nteratina ne dla and bayer mes. nya emp maar incoing without ttn he mpl waa of metcharaby a of fie for parca ee. Te fermatan conan heres
epetent ype proper and hou! ot be ede speciaon pote Any tandationi Ponsa or Yor conven ory. The tc angage Egat and he tal Ca USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet RIC
Resin infusion connector
DESCRIPTION
The Airtech Resin infusion connector (RIC) provides inexpensive and efficient through bag connection for
vacuum manifold and resin feed lines for low temperature resin infusion applications.
@ BENEFITS
+ Saves time connecting poly tubing to vacuum bags.
+ Avoid quality problems due to vacuum bag leakage at pipe connections.
+ Simple design works for resin fed spirals and on vacuum spiral lines.
@ TECHNICAL DATA
Material type Polyethylene UHMW
Maximum use temperature 176 F (80 C)
Color White
@ SIZES
RIC 12 1/2 inch (13 mm) 1/2 inch (13 mm)
RIC 58 5/8 inch (16 mm) 5/8 inch (16 mm)
RIC 34 3/4 inch (19 mm) 3/4 inch (19 mm)
acto
” airte |
i
aint
@ NOTES
+ Select RIC to fit tube and spiral employed and position as desired, then complete vacuum bag.
+ Cut polyethylene tube on angle and apply wrap of vacuum sealant tape above cut.
+ Smooth bag film over RIC and pierce film with angled tube until vacuum sealant seals connection.
+The maximum use temperature is dependent upon the duration at maximum temperature and
is process specific, Airtech recommends testing prior to use.
Last updated : 2021-07-29
Catalog position : Resin infusion products
the conditions or methods of use aching storage, ae beyond out contol Artech Intemational x. des not ese ay regan othe performance of material foray para we Te mate sodas
Artech Iematonal ic decals and bye wanes any anda pled varates nung witout tain the mpd waranles of mertantablty nd of fnes fo partcar use. he nfermaton contained heen
presents ypcal properter and shold not be uted fr speciation purpose Any tandton pred for your convenience ony The ofl language sEngish andthe ofl wie alors USA
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF Ls CA 92647 USA
INTERNATIONAL INC.
Data Sheet RESINFLOW 90 HT
Clear high temperature resin distribution medium
DESCRIPTION
Resin distribution medium for elevated temperatures. Resinflow 90 HT is designed for resin infusion with cures at
177 C (350 F). The fused overlay construction provides optimum flow characteristics.
@ TECHNICAL DATA
Material type Nylon
Colour Clear
Configuration of net Extruded (Rhombic)
Maximum use temperature 204 C (399 F)
Melt point 218 C (425 F)
r Unlimited when stored in original packaging at 22 C
Shelf life (72 F)
SIZES
0.9 mm (0.035 in) 1.01 m (40 in) 152 m (500 ft)
ae Hi We oe ee EES eee ee
eee MS esas
beer SAE RE
Poteteteteteteetecestctatrtee soreten ee $2 LALLA ALARA Serta
@ NOTES
+ This product is an extruded mesh and does not fray when cut.
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2025-05-15
Catalog position : Resin infusion products
by | Sep 27, 2025
TECHNICAL DATA SHEE T
RC-3000- NB
BREATHER FABRIC
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS RC-3000- NB_02.21_Issue1
RC-3000-NB
Breather fabric
Ideally suited to high temperature applications
Features and Benefits
Nylon 66, non- woven felt which operates at
temperatures up to 232 C (450 F) without trapping
off air flow.
Available in 225, 339 and 369g/m (6, 10 and
13oz/yd ) for withstanding pressure to over 200psi
(13.8bar).
Non-toxic, non-corrosive, non-dusting and non-
allergenic.
Resists compression and heat set as experienced by
other lower temperature resistant fibers.
PROPERTIES
Maximum use temperature 232 C 450 F
Color White
Fiber Nylon
Weight
RC-3000-6NB 225g/m 6oz/yd
RC-3000-10NB 339g/m 10oz/yd
RC-3000-13NB 369g/m 13oz/yd
NB: RC- 3000-NB has no release characteristics and should be separated from the laminate by a suitable porous release
fabric or film when used in conjunction with uncured materials.
AVAILABILITY
Standard width Up to 1.52m Up to 60in
Standard length
RC-3000-6NB 45.7m 50yd
RC-3000-10NB/13NB 91.4m 100yd
Cut shapes/slit widths Available up to 120in wide to order
STORAGE
No special storage conditions required.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
