5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet RIC
Resin infusion connector
DESCRIPTION
The Airtech Resin infusion connector (RIC) provides inexpensive and efficient through bag connection for
vacuum manifold and resin feed lines for low temperature resin infusion applications.
@ BENEFITS
+ Saves time connecting poly tubing to vacuum bags.
+ Avoid quality problems due to vacuum bag leakage at pipe connections.
+ Simple design works for resin fed spirals and on vacuum spiral lines.
@ TECHNICAL DATA
Material type Polyethylene UHMW
Maximum use temperature 176 F (80 C)
Color White
@ SIZES
RIC 12 1/2 inch (13 mm) 1/2 inch (13 mm)
RIC 58 5/8 inch (16 mm) 5/8 inch (16 mm)
RIC 34 3/4 inch (19 mm) 3/4 inch (19 mm)
acto
” airte |
i
aint
@ NOTES
+ Select RIC to fit tube and spiral employed and position as desired, then complete vacuum bag.
+ Cut polyethylene tube on angle and apply wrap of vacuum sealant tape above cut.
+ Smooth bag film over RIC and pierce film with angled tube until vacuum sealant seals connection.
+The maximum use temperature is dependent upon the duration at maximum temperature and
is process specific, Airtech recommends testing prior to use.
Last updated : 2021-07-29
Catalog position : Resin infusion products
the conditions or methods of use aching storage, ae beyond out contol Artech Intemational x. des not ese ay regan othe performance of material foray para we Te mate sodas
Artech Iematonal ic decals and bye wanes any anda pled varates nung witout tain the mpd waranles of mertantablty nd of fnes fo partcar use. he nfermaton contained heen
presents ypcal properter and shold not be uted fr speciation purpose Any tandton pred for your convenience ony The ofl language sEngish andthe ofl wie alors USA