08RIV05_TDS.pdf

5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet INFUSION TUBING CONNECTORS & VALVES
Infusion tube fittings
lM DESCRIPTION
Various infusion tube fittings are available to connect tubes and valves to control resin flow.
M@ TECHNICAL DATA
Nylon fittings
Material type Nylon
Maximum use temperature 356 F (180 C)
Colour Translucent
Infusion valve
Material type Polypropylene
Maximum use temperature 248 F (120 C)
Colour Black
lM SIZES
Connector Type
Nylon barb “T” fitting NTF3/8 3/8″ |.D. tubing
NTF1/2 1/2″ |.D. tubing
NTF5/8 5/8″ |.D. tubing
Nylon barb “Elbow” fittings NEF3/8 3/8″ |.D. tubing
NEF1/2 1/2″ |.D. tubing
NEF5/8 5/8″ .D. tubing
Nylon barb “Coupling” fittings NCF3/8. 3/8″ |.D. tubing
NCF1/2 1/2″ |.D. tubing
NCF5/8 5/8″ |.D. tubing
Infusion Valve Infusion Valve 1/2 3/8″ |.D. tubing
Infusion Valve 5/8 1/2″ |.D. tubing
ap _
–
Infusion Valve Coupling “T” Fitting Elbow Fitting
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2023-10-17
Catalog position : Resin infusion products 4
at emt orth i cig rn on Aichi doe nr egy thon ftir iy prereset be 4