by | Sep 27, 2025
a ae a aaa aaa aa aaaaaaaaaaaaaaaaaaaaacacaaasaaaaaama aaa aaa
Richmond
Aircraft Products
TECHNICAL DATA 3/24/2008
Oriented Polyester Tape
DESCRIPTION:
SHRINK TAPE II is an oriented polyester tape designed to shrink during the cure cycle and apply pressure to the
composite lay-up or adhesive bond. ] |
|
|
APPLICATION: |
SHRINK TAPE II is normally wrapped over the laminate on the mold with pressure sensitive tape put in place to
prevent movement during cure, The assembly is then exposed to heat and the SHRINK TAPE II begins applying
pressure (onset of shrink) at 175 F (79 C) with maximum shrinkage at 400 F (205 C). SHRINK TAPE II is
available with or without perforations or release agent coating.
PHYSICAL PROPERTIES:
Roll width: 1.25″ and 2.50″ 3.17 cm & 6.33 cm
Roll length: 100 yards. 91.4m
Shrinkage: 20 % maximum
Onset 175 F 79 C
Maximum use temperature: 400 F 205 C
Other widths are available.
NOTE: DATA PROVIDED IS FOR INFORMATION ONLY AND DOES NOT CONSTITUTE ANY WARRANTY FOR THE PRODUCT. AS THE CONDITIONS AND VARYING
METHODS OF USE ARE BEYOND OUR CONTROL, RICHMOND AIRCRAFT PRODUCTS, INC. SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL,
(OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE, OR INABILITY
TO USE THESE MATERIALS. THESE MATERIALS ARE PROVIDED AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
13503 Pumice Street, Norwalk, California 90650 – TEL 562-404-2440 – FAX 562-404-9011
117
by | Sep 27, 2025
_ SM5700
eS TAPE SEALANT
TECHNICAL DATA SHEET
PRODUCT DESCRIPTION: TAPE APPLICATION:
Tacky Tape SM5700 is a 100% solids compound that is a blend a) Position tape approximately 1/32 of an inch below the
of polyisobutylene polymer and highly crosslinked butylpolymer. sight line of the fixed stop. Avoid running one
It is supplied as a preformed sealant in rope form. The product continuous length of tape around the entire opening.
can be described as a dense, tacky, rubber-like compound. Do not lap adjoining lengths of tape. Butt the tape
ends together, tool forming a molded-type corner.
BASIC USES: Then seal the joint with SM5504 Narrow Joint Sealant.
SMS700 Tape Sealant is used for sealing and bedding vision lites This technique will allow intimate contact of tape and
and panels found in fenestration details. It can also be used to glass or panel surfaces.
seal other joint details found in assembly and fabrication
operations where a high-solids, non-drying preformed sealant is b) If frame joinery (butt joint) is vertical, apply the tape
required. SMS700 may be factory or field applied. No primers on the head and sill sections covering this joint prior to
are required to obtain adhesion. Clean substrates are required. applying tape to the jamb sections. If the joinery is
The tape exhibits excellent weatherability when exposed to horizontal apply the tape to jamb sections, covering
ultraviolet and infrared radiation, atmospheric hydrocarbon the joint, prior to head and sill application. Seal all
contamination and extremes in temperature. SMS700 will not tape joints with SM5504 Narrow Joint Sealant.
craze acrylic or polycarbonate plastic surfaces.
) Setting blocks should have a Shore A hardness of 80-
INSTALLATION: 90. These should be placed at quarter points on the
Preparation: sill member. Prior to use, setting blocks and anti-
a) A clean dry uncontaminated surface is required for walking blocks must be tested for sealant
optimum sealant performance. Joints must be compatibility.
inspected prior to application and any condition that
could cause sealant failure should be reported to the d) Center the glass or panel in the opening on the setting
general contractor and architect. blocks and press firmly against the tape.
b) Cleaning of substrate surfaces to remove oil films, LIMITATIONS:
protective coating, and atmospheric contamination is Not recommended for:
easily accomplished with a degreasing solvent like a) Joints that will be subjected to prolonged periods of
xylene, toluene or methyl ethyl ketone. The use of water submersion.
these solvents (or other solvents) may be hazardous to b) Joints that are contaminated with oil, grease, wax,
your health. Use only in well ventilated areas. KEEP lacquer films, corrosion, bitumens, uncured or cured
AWAY FROM OPEN FLAME. Read all labeling before solvent-trapped wood treatment, damp, wet or frost
use and follow solvent ~ manufacturer s bearing surfaces.
recommendations and instructions for safe handling.
c) Inspect all sash to assure that openings are square,
plumb and properly anchored to assure face and edge
clearances. Ventilators and operating sash must be
adjusted and glazed in closed position.
d) Seal all butt and miter joints in frame joinery with
SMS504 Narrow Joint Sealant prior to tape application.
ITW POLYMERS SEALANTS NORTH AMERICA, INC. 41/2020
12055 Cutten Rd. Houston TX 77066
Tel: 972-438-9111 Fax: 972-554-3939 www.itwsealants.com
by | Sep 27, 2025
Holcim Solutions and Products US, LLC
1-800-878-7876 www.holcimtacky-tape.com
TECHNICAL DATA SHEET
PRODUCT DESCRIPTION:
Tacky Tape
SM5160 is an advanced process vacuum bag tape
sealant that was developed to fulfill the stringent requirements
of very high temperature cure requirements. This dark brown
colored tape sealant is formulated with a unique base polymer
to function throughout a temperature range of 375
o
F (191
o
C) to
750
o
F (399
o
C). Extended cure cycles of twelve (12) hours or
longer at intermediate temperatures of 400 F (204 C) to 600 F
(315 C) are possible.
ADVANTAGES:
Easy to apply by hand (User friendly)
Ideal for oven or autoclave cure
375
o
F (191
o
C) to 750
o
F (399
o
C) cure cycles
Tenacious adhesion to polyimide films and tool
surfaces
Strips clean from tools surfaces
Non-Hazardous and thermally stable
APPLICATION:
Apply by hand to a clean dry tool or platen with release paper on
top. When the sealant is in position remove the release paper
and lay the film on top. Apply pressure by hand or roller on the
sealant to obtain maximum adhesion and to ensure positive
vacuum. A hot roller or iron (not to exceed 400 F [204 C] can be
used to apply pressure on the sealant. It is recommended to
strip below 150
o
F (66
o
C) to minimize or reduce the parts from
becoming warped. SM5160 can be stripped without leaving a
residue on metal tool surfaces that have been cooled to room
temperature.
PACKAGING:
Tacky Tape
SM5160 sealant is supplied in roll form with a
special release paper. The standard size is x x 30 , other
sizes will be considered on request.
This product is available through Holcim Solutions and
Products US, LLC. Customer Service department at 1-800-878-
7876.
PERFORMANCE TEMPERATURE RANGE:
Application Temperature Range: 45
o
F (7
o
C) to 120
o
F (49
o
C)
Service Temperature Range: 350
o
F (177 C) to 750
o
F (399 C)
TYPICAL PROPERTIES:
COLOR: Dark Brown
PERCENT SOLID: 100%
CONSISTENCY: Cone
Penetration
90 – 140
150 GRAM LOAD
ASTM D-217
WEIGHT/GALLON: 9.0 – 9.5 LBS/GALLON
FREIGHT CLASSIFICATION: Caulking Compound, NOIBN (NO
LABEL REQUIRED)
STORAGE: Keep in cool dry place. Tacky
Tape
SM5160 has a 14 month
shelf life from date of
manufacture when stored at or
between 80
o
F (27
o
C) and 0
o
F (-
17.8
o
C). Note: Material must be at
room temperature for application.
Do not store cartons on end, keep
flat.
Complete technical information is available from
Holcim Solutions and Products US, LLC.
03/2023
SM5160
ULTRA HIGH TEMPERATURE
VACUUM BAG SEALANT TAPE
EXCLUSION OF WARRANTIES:
INSTALL AS DIRECTED ON TACKY-TAPE PRODUCT DATA SHEET. USER
DETERMINES SUITABILITY FOR INTENDED USE AND ASSUMES ALL RISK
AND LIABILITY. THIS PRODUCT IS SOLD AS IS. EXCEPT AS REQUIRED
BY LAW, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, WITHOUT LIMITATION, WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF
TERMS ARE NOT ACCEPTABLE, RETURN UNOPENED PRODUCT TO PLACE
OF PURCHASE. DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THESE
PRODUCTS.
by | Sep 27, 2025
Holcim Solutions and Products US, LLC
1-800-878-7876 www.holcimtacky-tape.com
TECHNICAL DATA SHEET
PRODUCT DESCRIPTION:
Tacky Tape
SM5153 has been developed for the wind energy and
aerospace industry as vacuum bag tape for vacuum bagging
operations, wind blades and composite manufacturing. This
product has been formulated to outperform all tapes in its class.
With aggressive initial tack, it will maintain an air-tight seal during
the cure cycle, yet strip clean from the tool, with virtually no trace
of residue. SM5153 provides easy, almost effortless de- bagging,
and minimal to no clean-up between production cycles. SM5153
exhibits these excellent usage and release characteristics from
composite and metal tools, in both oven and autoclave
applications. This tape has an optimum cure temperature range
of room temperature to 400
o
F (204 C).
ADVANTAGES:
Easy to apply by hand (User friendly)
PERFORMANCE TEMPERATURE RANGE:
Application Temperature Range: 45
o
F (7
o
C) to 120
o
F (49
o
C)
Service Temperature Range: Room Temp to 400
o
F (204 C)
TYPICAL PROPERTIES:
Ideal for oven or autoclave cure
Excellent release from composite tooling
Uses include: debulking/ compacting, envelope
bagging, resin damming, or as pressure strip
Has been shown to survive 30 debulking cycles
Room temperature to 400
o
F (204
o
C ) cure cycles
Maintains adhesion during low temperature cycling
Good adhesion to various films and tool surfaces
Strips clean from tools surfaces leaving no residue
Non-Hazardous
APPLICATION:
Apply by hand to a clean dry tool or platen with release paper on
top. When the sealant is in position remove the release paper and
lay the film on top. Apply pressure by hand or roller on the sealant
to obtain maximum adhesion and to ensure positive vacuum. It is
recommended to strip below 150
o
F (66
o
C) to minimize or reduce
the parts from becoming warped. SM5153 can be stripped
without leaving a residue on metal tool surfaces that have been
cooled to room temperature.
PACKAGING:
Tacky Tape
SM5153 sealant is supplied in roll form with a
special release paper.
This product is available through Holcim Solutions and
Products US, LLC. Customer Service department at 1-800-878-
7876.
Complete technical information is available from
Holcim Solutions and Products US, LLC.
SM5153
VACUUM BAG SEALANT TAPE
EXCLUSION OF WARRANTIES:
INSTALL AS DIRECTED ON TACKY-TAPE PRODUCT DATA SHEET. USER
DETERMINES SUITABILITY FOR INTENDED USE AND ASSUMES ALL RISK
AND LIABILITY. THIS PRODUCT IS SOLD AS IS. EXCEPT AS REQUIRED BY
LAW, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. IF TERMS ARE NOT ACCEPTABLE,
RETURN UNOPENED PRODUCT TO PLACE OF PURCHASE. DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THESE PRODUCTS.
COLOR: Yellow
PERCENT SOLID: 100%
CONSISTENCY: Cone
Penetration
80 – 95
300 GRAM LOAD
ASTM D-217
WEIGHT/GALLON: 10.2 LBS/GALLON (1.22 Kg/L)
FREIGHT CLASSIFICATION: Caulking Compound, NOIBN (NO
LABEL REQUIRED)
STORAGE: Keep in cool dry place. Tacky Tape
SM5153 has a 14 month shelf life
from date of manufacture when
stored at or below 80
o
F (27
o
C). Do
not store
cartons on end, keep flat.
Holcim Solutions and Products US, LLC
1-800-878-7876 www.holcimtacky-tape.com
03/2023
by | Sep 27, 2025
Holcim Solutions and Products US, LLC
1-800-878-7876 www.holcimtacky-tape.com
TECHNICAL DATA SHEET
PRODUCT DESCRIPTION:
Tacky Tape
SM5144 is a sealant tape developed for use in
vacuum bagging. This product has been formulated to
outperform all tapes in its class. Initial tack is great and it will
maintain an air-tight seal during the cure cycle and then strip
clean from the mold during de- bagging. This tape has an
optimum cure temperature range of room temperature to 425
o
F
(218
o
C).
ADVANTAGES:
Easy to apply by hand (User friendly)
TYPICAL PROPERTIES:
Ideal for oven or autoclave cure
Uses include: debulking/ compacting, envelope
bagging, resin damming, or as pressure strip
Has been shown to survive 30 debulking cycles
Room temperature to 425
o
F (218
o
C ) cure cycles
Good adhesion to various films and tool surfaces
Strips clean from tools surfaces
Non-Hazardous
APPLICATION:
Apply by hand to a clean dry tool or platen with release paper on
top. When the sealant is in position remove the release paper
and lay the film on top. Apply pressure by hand or roller on the
sealant to obtain maximum adhesion and to ensure positive
vacuum. It is recommended to strip below 150
o
F (66
o
C) to
minimize or reduce the parts from becoming warped. SM5144
can be stripped without leaving a residue on metal tool surfaces
that have been cooled to room temperature.
PACKAGING:
Tacky Tape
SM5144 sealant is supplied in roll form with a
special release paper.
This product is available through Holcim Solutions and
Products US, LLC. Customer Service department at 1-800-878-
7876.
PERFORMANCE TEMPERATURE RANGE:
Application Temperature Range: 45
o
F (7
o
C) to 120
o
F (49
o
C)
Service Temperature Range: Room Temp to 425
o
F (218 C)
Complete technical information is available from
Holcim Solutions and Products US, LLC.
SM5144
VACUUM BAG SEALANT TAPE
EXCLUSION OF WARRANTIES:
INSTALL AS DIRECTED ON TACKY-TAPE PRODUCT DATA SHEET. USER
DETERMINES SUITABILITY FOR INTENDED USE AND ASSUMES ALL RISK
AND LIABILITY. THIS PRODUCT IS SOLD AS IS. EXCEPT AS REQUIRED
BY LAW, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, WITHOUT LIMITATION, WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF
TERMS ARE NOT ACCEPTABLE, RETURN UNOPENED PRODUCT TO PLACE
OF PURCHASE. DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THESE
PRODUCTS.
COLOR: Yellow
PERCENT SOLID: 100%
CONSISTENCY: Cone
Penetration
80 – 95
300 GRAM LOAD
ASTM D-217
WEIGHT/GALLON: 10.2 LBS/GALLON (1.22 Kg/L)
FREIGHT CLASSIFICATION: Caulking Compound, NOIBN (NO
LABEL REQUIRED)
STORAGE: Keep in cool dry place. Tacky
Tape
SM5144 has a 14 month
shelf life from date of
manufacture when stored at or
below 80
o
F (27
o
C). Do not store
cartons on end, keep flat.
Holcim Solutions and Products US, LLC
1-800-878-7876 www.holcimtacky-tape.com
ITW POLYMERS SEALANTS NORTH AMERICA, INC.
111 S. Nursery Road. Irving, TX 75060
Tel: 972-438-9111 Fax: 972-554-3939 www.itwsealants.com
4/11/2017
by | Sep 27, 2025
Holcim Solutions and Products US, LLC
1-800-878-7876 www.holcimtacky- tape.com
TECHNICAL DATA SHEET
PRODUCT DESCRIPTION:
Tacky Tape
SM5142 is a sealant tape developed for vacuum
bagging operations. This product has been formulated to
outperform all tapes in its class. With aggressive initial
tack, it will maintain an air-tight seal during the cure cycle,
yet strip clean from the tool, with virtually no trace of residue.
SM5142 provides easy, almost effortless de-bagging, and
minimal to no clean-up between production cycles. SM5142
exhibits these excellent usage and release characteristics
from composite and metal tools, in both oven and autoclave
applications. This tape has an optimum cure temperature range
of room temperature to 400
o
F (204 C).
ADVANTAGES:
Easy to apply by hand (User friendly)
Ideal for oven or autoclave cure
PERFORMANCE TEMPERATURE RANGE:
Application Temperature Range: 45
o
F (7
o
C) to 120
o
F (49
o
C)
Service Temperature Range: Room temp to 400
o
F (204 C)
TYPICAL PROPERTIES:
Excellent release from composite tooling
Uses include: debulking/ compacting, envelope
bagging, resin damming, or as pressure strip
Has been shown to survive 30 debulking cycles
Room temperature to 400
o
F (204
o
C) cure cycles
Maintains adhesion during low temperature cycling
Strips clean from various tools surfaces leaving no
residue
Good adhesion to various films and tool surfaces
Non-Hazardous
APPLICATION:
Apply by hand to a clean dry tool or platen with release paper on
top. When the sealant is in position remove the release paper
and lay the film on top. Apply pressure by hand or roller on the
sealant to obtain maximum adhesion and to ensure positive
vacuum. It is recommended to strip below 150
o
F (66
o
C) to
minimize or reduce the parts from becoming warped. SM 5142
can be stripped without leaving a residue on metal and
composite tool surfaces that have been cooled to room
temperature.
PACKAGING:
Tacky Tape
SM5142 sealant is supplied in roll form with a
special release paper.
This product is available through Holcim Solutions and
Products US, LLC. Customer Service department at 1-800-878-
7876.
Complete technical information is available from
Holcim Solutions and Products US, LLC.
03/2023
SM5142
VACUUM BAG SEALANT TAPE
EXCLUSION OF WARRANTIES:
INSTALL AS DIRECTED ON TACKY-TAPE PRODUCT DATA SHEET. USER
DETERMINES SUITABILITY FOR INTENDED USE AND ASSUMES ALL RISK
AND LIABILITY. THIS PRODUCT IS SOLD AS IS. EXCEPT AS REQUIRED
BY LAW, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, WITHOUT LIMITATION, WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF
TERMS ARE NOT ACCEPTABLE, RETURN UNOPENED PRODUCT TO PLACE
OF PURCHASE. DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THESE
PRODUCTS.
COLOR: Yellow
PERCENT SOLID: 100%
CONSISTENCY: Cone
Penetration
80 – 95
300 GRAM LOAD
ASTM D-217
WEIGHT/GALLON: 10.2 LBS/GALLON (1.22 Kg/L)
FREIGHT CLASSIFICATION: Caulking Compound, NOIBN (NO
LABEL REQUIRED)
STORAGE: Keep in cool dry place. Tacky
Tape
SM5142 has a 14 month
shelf life from date of
manufacture when stored at or
below 80
o
F (27
o
C). Do not store
cartons on end, keep flat.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
SM5127
SEALANT TAPE
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS SM5127_0 2.21_Issue1
SM5127
Sealant tape
Ideally suited to aerospace applications
Features and Benefits
Approved on a number of major aerospace
specifications.
Strips cleanly and quickly after curing, on cooling
below 66 C (151 F).
Tenacious adhesion to all commonly used vacuum
bagging films.
Ideal for use on composite or Invar tooling.
Ideal where extended post cure is required.
PROPERTIES
Maximum cure temperature 204 C 400 F
Color Dark grey
AVAILABILITY
Roll size 9.14m x 12mm x 3mm 30ft x 0.5in x 0.125in
Standard box contents 32 rolls per box
STORAGE
Must be stored in its original containers, below 27 C (80 F).
Material has a 12 month shelf life from date of manufacture.
Must be stored flat.
Boxes should be stacked no more than 5 high.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
Holcim Solutions and Products US, LLC
1-800-878-7876 www.holcimtacky-tape.com
EXCLUSION OF WARRANTIES:
INSTALL AS DIRECTED ON TACKY-TAPE PRODUCT DATA SHEET. USER
DETERMINES SUITABILITY FOR INTENDED USE AND ASSUMES ALL RISK
AND LIABILITY. THIS PRODUCT IS SOLD AS IS. EXCEPT AS REQUIRED
BY LAW, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, WITHOUT LIMITATION, WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF
TERMS ARE NOT ACCEPTABLE, RETURN UNOPENED PRODUCT TO PLACE OF PURCHASE. DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THESE
PRODUCTS.
TECHNICAL DATA SHEET
PRODUCT DESCRIPTION:
TACKY TAPE
SM5127 is a charcoal gray colored tape sealant
that is an unsurpassed performer where post cure cycles are
required. It is compatible with most bagging films and is an ideal
choice for use on composite tool surfaces. It is used in the
fabrication of parts where oven or autoclave cycles require
maintaining a vacuum. A positive seal during extended post
cure cycles from 250 F (121 C) TO 400 F (204 C) is easily
accomplished with this product.
ADVANTAGES:
Easy to apply by hand (User friendly)
Ideal for oven or autoclave cure
250
o
F (121
o
C) temperature to 400
o
F (204
o
C) cure
cycles
Strips clean from various tools surfaces
Tenacious adhesion to nylon films and tool surfaces
Non-Hazardous and thermally stable
APPLICATION:
Apply by hand to a clean dry tool or platen with release paper on
top. When the sealant is in position remove the release paper
and lay the film on top. Apply pressure by hand or roller on the
sealant to obtain maximum adhesion and to ensure positive
vacuum. It is recommended to strip below 150
o
F (66
o
C) to
minimize or reduce the parts from becoming warped. SM5127
can be stripped without leaving a residue on metal tool surfaces
that have been cooled to room temperature.
PERFORMACE TEMPERTAURE RANGE:
Application Temperature Range: 45 F (7 C) to 120 F (49 C)
Service Temperature Range: Room temp. to 400 F (204 C)
PACKAGING:
Tacky Tape
SM5127 sealant is supplied in roll form with a
special release paper. Several standard tape dimensions are
available. This product is available through Holcim Solutions
and Products US, LLC. Customer Service department at 1-800-
878-7876.
TYPICAL PROPERTIES:
COLOR: Charcoal Gray
PERCENT SOLID: 100%
CONSISTENCY: Cone
Penetration
80 – 90
300 GRAM LOAD
ASTM D-217
WEIGHT/GALLON: 11.9 LBS/GALLON (1.43 Kg/L)
FREIGHT CLASSIFICATION: Caulking Compound, NOIBN (NO
LABEL REQUIRED)
STORAGE: Keep in cool dry place. Tacky
Tape
SM5127 has a 14 month
shelf life from date of
manufacture when stored at or
below 80
o
F (27
o
C). Do not store
cartons on end, keep flat.
Complete technical information is available from Holcim
Solutions and Products US, LLC
03/2023
SM5127
VACUUM BAG SEALANT TAPE
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
‘ = Huntington Beach Fax : +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet SUPERLEASE BLUE
Coated nylon peel ply
DESCRIPTION
Superlease Blue peel ply is a high temperature fabric coated with a silicone release agent. It provides superior
release to plain peel plies because the coating prevents the fabric from bonding to the laminate while
producing a textured surface. It will provide easy release from most prepregs and resin systems. All coated peel
plies have the potential to transfer. Superlease Blue is a tightly woven, coated nylon peel ply that releases well
with most resin systems. It is a superior peel ply for resin infusion or other resin rich processes.
Hi CBENEFITS
+ Release coating reduces the effort required to remove peel ply from laminate.
+ Peel plies strip off of cured laminates leaving a textured surface, reducing time spent hand finishing.
+ Fabric has been scoured to reduce need for removing contaminants off cured laminates.
@ TECHNICAL DATA
Maximum use temperature 450 F (232 C)
Fiber type Nylon
Fabric construction: warp x fill 104 x 87 ends/in x picks/in (409 x 342 ends/dm x picks/dm)
Weight 1.83 oz/yd? (62 g/m?)
Thickness 0.0045 inch (0.114 mm)
Color Blue
Materials to avoid Phenolic resins
Coating type Silicone
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
SIZES
60 inches (152 cm) 100 yards (91 m) Troll
Mi NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Hot knife (sealed edge) slitting upon request with 1 roll as minimum order quantity.
Last updated : 2020-12-07
Catalog position : Release fabrics / Peel plies <7
-Asthecondionsormethad fs ncn tara, beyond ou conto Atech wtemationl nc does ot sme ay responsi far thepedermanc fis mato ay pair. The mato
itech hteratonal nc cin: and bye waves wy an a ined warentesncaeg whoa dtaton e npics nan: of erhrtay an of est parce Te bematon coeed hen
represent pial popes and sho ot be ved fe Spefrion pups Ary Worsatan fs rvides or you convenience ny The ofa unguage mgt and te ofc carn USA
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
ff Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
ya er CA92647 USA
INTERNATIONAL INC.
Data Sheet STRETCHLON 700
Bagging film with an excellent flexibility
iC DESCRIPTION
Stretchlon 700 vacuum bag film is a high elongation elastomeric film which is designed for cures up to 385 F (195 C).
It is particularly suitable for applications where softness and elongation are required. The risk of bridging in the
corners is highly reduced due to the elasticity of the film. This film stays soft even in a very low humidity environment.
Stretchlon 700 is recommended for cures with phenolic and epoxy resins.
@ BENEFITS
+ High elongation film avoids bridging in corners and improves part quality.
+ Chemically resistant film avoids blown bags with aggressive resins.
+ Avoid cost of scrap and rework on complex phenolic parts.
Hi TECHNICAL DATA
Test method
Material type Thermoplastic elastomer
Elongation at break 500 % ASTM D 882
Tensile strength 6500 psi (45 MPa) ASTM D 882
Maximum use temperature 195 C (385 F)
Materials to avoid Bismaleimide (BMI) / Polyester and vinyl ester
Colour Cream
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
SIZES
width | Length | Weight / Roll Foims Available
0.003 inch (75 um) 60 inches (1.52 m) 1000 feet (305 m) 97 Ibs (44 kg) SHT
0.003 inch (75 um) 120 inches (3.05 m) 500 feet (152 m) 97 Ibs (44 kg) CF to 60 inches (1.52 m)
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
H NOTES
+ Sale and use of the product covered by US Patent No. 5123985.
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a demo video of Stretchlon 700 in the "Media Center" on our website.
Last updated : 2024-06-28
Catalog position : Bagging films
ste connor meds lung orgs abso ou etl Ath esta dott aan repent he peace hs mel oy parc The mtr sch erate
cian bay oes ny anda ped ara cg wb eaten hed wate ol erry an of eso parce Te Hdomaton cane hrs epnes Wp preps eet beet
prtn ppc ay tana prot Younes On ocalungage gn ante oil vs aoa UK
