5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax :+1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet RB 451
Vacuum reservoir for resin infusion
DESCRIPTION
The RB 451 vacuum reservoir is designed to collect excess resin during the vacuum assisted resin transfer
molding process (VARTM). The RB 451 has 1 vacuum inlet and 1 outlet port. Multiple fittings are included. The
unit comes equipped with a vacuum regulator/ gauge for reduced vacuum and leak detection applications. By
disconnecting the vacuum source, one can view the gauge for signs of decreasing vacuum, ie., leaks.
Additionally, each unit includes:
+ A polypropylene bucket to collect the resin without damaging the tank inside.
+ An AQD 500BF Quick Disconnect 1/4″ Male NPT to be mounted on the tank vacuum source.
+ 1/2″ barbed fitting (5/8″ I.D. hose)
+ 5/8″ barbed fitting (3/4″ I.D. hose)
TECHNICAL DATA
Tank size 2.5 gallons (10 liters)
Tank diameter 12 inches (30 cm)
Tank height, with the handle 18 inches (46 cm)
Vacuum source Barbed fitting 3/8 inch diameter
Resin inlet Barbed fitting 1/2 inch diameter or 5/8 inch diameter
Maximum service temperature 122 F (50 C)
( eenee a
: 2)
cud
(800) 281-4975
sales@revchem.com
