Distributed By
; Est @)ve2
PRO-SET. Piibarglass Sualy
. HANDLING PROPERTIES mil
Technical Data Property Standard) Units. 1-072″F (22 C)
100g Pot Life | ASTM 02471 | minutes | 225-275
XR28 A~M2046 _vicosivixes TASTMD2196| cP 325
Viscosity (resin) _ASTM D2196| cP | 480
FIRE RETARDANT | Viscosity (hardener) | ASTMD2196| cP | 115
INFUSION EPOXY
COMBINED FEATURES MIX RATIO DENSITY
Very low viscosity for rapid saturation of Method RosiniHardener: Resin:Hardener. State Units: 72 F (22 C)
fiberglass, Kevlar and carbon fiber Weight | 3.85:1 | 100:26.0 Resin | Ib/gal (g/cc) | 9.51 (1.14) |
laminate with resin infusion and VARTM Volume 3.23:1 I 100:31.0 Hardener | Ib/gal (g/cc) | 8.10 (0.97)
Processes. MECHANICAL PROPERTIES
js RT Gelation
Slow speed hardener provides about 4 Property Standard Units + 140 F (60 C)
hours of pot life at 72 F (22 C). xB hrs
Fire retardant syst ntains high Hardness | ASTM D2240 | Type D_| 54
EPOXIES for levels of phospherous to reduce flome Compression Vield “ASTM D695 psi (MPa) | 40,430 (72)
, et rn Tensile Strength __ASTM D638 | psi (MPa) | 8,040 (55)
Laminating spread and smoke generation in a Tensi + 7
i . ensile Modulus __ ASTM D638 psi (MPa) | 4.14E+05 (2854)
composite laminate when compared to a – . t – a 1 –
Infusion standard resin system Tensile Elongation | ASTM DES: e __| ae –
~ y’ . Flexural Strength | ASTM D790 | psi (MPa) | 14,000 (97)
Tooling This combination is formulated Flexural Modulus ASTMD790 | psi(MPa) | 4.27E+05 (2944)
: specifically for resin infusion and VARTM
Assembly processes. Do not use in open mold THERMAL PROPERTIES
icati RT Gelation
applications.
. | Property Standard Units + 140 F (60 C)
Elevated temperature cure is required. x 8 hrs
fougeon Brothers, Ino. |_ Tg DSC Onset-tst Heat |_ASTME1356 | F ( C) 127 (53)
P.0, Box 908 Heat Deflection Temperature | ASTM D648 SFC) | 124 (51
Bay City, Ml 48707 Ultimate Tg by DSC ASTM E1356 F( C) | 149 (65)”
prosetepoxy.com Additional post cure may be required; contact Technical Department for detail.
888-377.6738 ? Store PRO-SET Epoxy resins and hardeners at room temperature in sealed containers until shortly before use. As with many high-performance
~ ore epoxy resins, repeated exposure to low temperatures during storage may cause the resin to crystallize. If this occurs, warm the resin to 125* F and stir
to dissolve crystals, Hardeners may form carbamation when exposed to CO, and moisture in the atmosphere for extended periods of time, Prevent
5090012018 Contitied carbamation by protecting hardeners from exposure unti immediately prior to processing.
Test specimens were neat f $)
epoxy (without fiber {
Rev 6 / Mar 2024 memnens 6
Typical values, not to be : can ~ QC Tinting Avaita
2024 Gougeon Brothers, Inc construed as specification. oe
To view more PRO-SET products, give us a visit at
fiberglasssupply.com!
(800) 281-4975
sales@revchem.com
