PRO-SET.
. HANDLING PROPERTIES
Technical Data Property, Standardl)svsr/sUnitsiny, 65 F (18 C)))) 72 F (22 C) 85 F (29 C)
TLG – 62 5- R 100 mi Pot Life ASTM D2471 76-94 31-39 27-33 |
500 mi Pot Life ASTM D2471_| minutes | 54-66 | 27-38 24-30
TLG 62 5 H Viscosity (Mixed) ASTM 02196 cP Paste Paste Paste |
– –
MIX RATIO DENSITY
FAI RI NG PUTTY EPOXY Method Resin:Hardener): Resin;Hardener State Units 72 F (22 C)
Weight | 1791 | 100:55.9 | Mixed Ib/gal (g/cc) | 5.26 (.64) |
[he New COMBINED FEATURES Volume ti 100:100
Standard Low density epoxy fairing putty is designed ~ _app1 iGATION PROPERTIES
for filling and fairing applications in custom Property ieTemperature Units Tavalule
building or repair situations. 5
Cure time to sand in .25″ thickness T2 F (21 C) hours _| B.
Pre-thickened system to allow for easier | 90 F (32 c) hours 4
mixing and smooth spreading. It is not
DAVINEG fry Mecessary to add fillers to this combination. MECHANICAL PROPERTIES
EPOXIES for : ; Property. ju Standard Units 77 F.(25 C) X:2 WK
oo Medium cure speed hardener provides Hardness. | ASTM 02240 Type D 62
Laminating approximately 90 minutes of working time at Compression Yield ~~~ ~ ASTMD695 | psi(MPa) | 3,334 (23) |
: 72 F (22 C). a
ated Coverage one mixed gallon covers 6.4 THERMAL PROPERTIES
i . . Property | Standard: Units THF (25 C) x2 wk
Tooling square feet at 0.25″ thickness. Heat Deflection Temperature PASTMET357 | F ( C) W747)
Assembly Low shrinkage epoxy chemistry allows for
y applications up to 0.50″ thick. Additional MIXING RECOMMENDATIONS
application necessary to fill deeper voids. Mixing of Fairing Putty Epoxy requires a folding motion on a flat surface due to
cougeon Bretvers Easy to sand low density epoxy can easily be ire pasterlike consistency. If red by rand, alow 10 minute inatiction sme for
eon Braliets. he sanded to achieve a desired contour. thixotropic recovery before application. Ensure there are no streaks of color
Ee aes a8 when applying, this is a sign of inadequate mixing. Mix only as much as can be
Say City, M148/07 Room temperature cure properties suitable applied within the pot life of the mixture.
ik i 7: on for many composite plugs and molds Some separation may occur during storage. Stir resin and hardener individually
Cost effective, high performance Epoxy
soonon2015 ceniey formulation for synthetic composite ” Store PRO-SET Epoxy resins and hardeners at room temperature in sealed containers until shortly before use. As with many
ae manufacturing. high-performance epoxy resins, repeated exposure to low temperatures during storage may cause the resin to crystallize. If this
occurs, warm the resin to 125 F and stir to dissolve crystals. Hardeners may form carbamation when exposed to CO and
Rev 2/Dec 2015 Shelf life is 18 months for resin and 18 moisture in the atmosphere for extended periods of time. Prevent carbamation by protecting hardeners from exposure until
months for hardener when properly stored . immediately prior to processing.
2018 Gougeon Brothers, Ine Test specimens were neat epoxy (without fiber reinforcement).
Typical values, not to be construed as specification.
(800) 281-4975
sales@revchem.com
