. HANDLING PROPERTIES
Technical Data Property Standard Units. 72 F (22 C) 77 F (25 C) 85 F (29 C)
LAM 1 2 150g Pot Life | ASTM 2471 | minutes | 318 || 253, | 147
nl 500gPotlife | ASTMO2471 | minutes | 221 | 75 | 115
~ Viscosity Mixed asTMD2196 | cP | 1288 1008 734
– 51 – Viscosity (resin) | ASTMO2196 | cP | 1734
Viscosity (hardener) | ASTMD2196 | cP 121
HIGH TEMPERATURE LAMINATING EPOXY MIX RATIO
COMBINED FEATURES Method Resin:Hardener| Resin:Hardener
. -, ” Weight 3.70:1 100:27.0
Low viscosity for quick wet out of synthetic Fae : – | 90026 5100-203
composite fabrics; especially effective with __Weight Range _| 4.01 1-3.34:1 1002 eS
Kevlar and carbon fiber. wolumel aun RECT Tae
Volume Range 3.29:1-2.74:1 | 100:32.2-100:35.6
Extra slow cure speed hardener provides 7 to
8 hours of working time at 77 F (25 C). A DENSITY
. typical laminate will be gelled in 12 to 14 hours. State Units 72 F (22 C)
– Optimized for hand wet out and machine Cured Ib/gal (g/cc) | 9.48 (1.14) |
iyatinn _ impregnation in contact molding, vacuum Resin Ib/gal (g/cc) _| 9.58 (1.15)
: bagging and Light RTM applications. Hardener Ib/gal (g/cc) | 9.48 (1.14)
WM Elevated temperature cure is required; VISCOSITY VS TEMPERATURE
thermal and mechanical properties suitable for 3000
composite components and high temperature
Assemb tooling and molds. 2500
Tg as high as 281 F (138 C) with proper post
cure providing excellent temperature stability = 2000
and great part cosmetics. = +500
Cost effective, high performance epoxy 3
formulation for synthetic composite 2 1000
manufacturing.
500
Quality-control tinting is available at no extra
charge; simply add “QC” after the product 0
code on your order. 50 60 70 80 90 100 110 120 130
Shelf life is 3 years for resin and 2 years for Temperature (“F)
Rev 2/ Feb 2014 hardener when properly stored .
Test specimens were neat epoxy (without fiber reinforcement).
Typical values, not to be construed as specification,
(800) 281-4975
sales@revchem.com
