PRO-SET.
* HANDLING PROPERTIES
Technical Data Standard | Units | 72 F (22 C) | 77 F (25 C) | 85 F (29 C
ACE-1 66 150g Pot Lite ASTM D2471 | minutes | 26-33 24-30 16-20
_ 500g Pot Life ASTM D2471_| minutes 26-32 21-27 16-20
AC E 265 Viscosity Mixed ASTM D2196 cP 1,054 878 661
–
MIX RATIO DENSITY
_ Method Resin:Hardener Resin:Hardener State Units 72 F (22 C)
The New ABSOLUTE CLEAR Weight 2.39:1 100:41.9 Cured | Ib/gal (g/ec)| 9.60 (7.15)
Cunncinrs . Weight Range | 2.33:1 2.70:1 | 100:42.9 100:37.0 Resin | Wb/gal (g/cc)|9.77 (1.17) _
2 tandard CLEAR COATING EPOXY – SLOW Volume 2.00:1 100:50.0 Hardener | Ib/gal (g/cc)’ 8.14 (0,98)
A f Volume Range 1.96:1 2.26:1 | 100:51.1 100:44.2
ilaieceeiedlieiad MECHANICAL PROPERTIES
Formulated for extremely clear coatings and Property Standard Units 72 F (22 C) x 2 wk
Se laminations with carbon and other Durometer Hardness ASTM D2240__| TypeD | 90
EPOXIES for yeinforcement fibers. Commonly used for clear Compression Yield | ASTM 0695 _/ _psi(MPa)_| _13,400 (92) _
| r coatings on wood, surfboard laminations and Tensile Strength ASTM D636 _ _|_(ps] (MP) _|____H40 (67)
Lam INQ 8 Z . . Tensile Modulus ASTM 0638 psi(GPa) | 5,07E+05 (3.5)
; other boardsport products in a production Tensile Elongation | ASTMD638_ eo L 96 =
IIUSION setting. Provides colorless clarity and UV Flexural Strength i _ASTM D790 psi(MPa) | 13,900 (96) _
Tooling stability. For ultimate long-term UV stability, Flexural Modulus ASTM D790 psi(GPa) | 4,78E+05 (3.3)
, ; ~ use with a UV stable top coat. THERMAL PROPERTIES
SSeMoply Property Standard | Units 72 F (22 C) x2 wk
Slow cure speed for fill coating, laminating and Tg DSC Onset-1st Heat ASTM E1356 | _ F ( C) 122 (50)
potting. Slow hardener provides a tack-free Heat Deflection Temperature ASTM D648 | = F ( C) 117 (47)
goon ot rs en of approximately 4 hours at 72 F TACK-FREE TIME
Bay City, Mi 48707 . 2 85 jsemmemseer ef
fusclepow.coi Easy processing for hand wet out of a ST i .
ese 6’35 lightweight reinforcement fabrics or fibers. = a i
soaurzascaraea, Provides extremely smooth surface when 8 | Tack-Free Time (hours) 4 5
cured , Excellent sandability. Reaches full 7 airauth Tana Raonhy anal
x 7 0 prevent water spotting, avoid contact with moisutre until epoxy is thoroughly cured.
physical properties at room temperature cure. *store PRO-SET Epoxy resins and hardeners at room temperature in sealed containers until shortly before use. As with many high-
performance epoxy resins, repeated exposure to low temperatures during storage may cause the resin to crystallize. If this occurs,
Shelf life is 3 years for resin and 2 years for warm the resin to 125 F and stir to dissolve crystals. Hardeners may form carbamation when exposed to CO, and moisture in the
hardener when properly stored?. atmosphere for extended periods of time. Prevent carbamation by protecting hardeners from exposure until immediately prior to
processing.
Rev 2 /Jan 2020 Test specimens were neat epoxy (without fiber reinforcement)
Typical values, not to be construed as specification.
(800) 281-4975
sales@revchem.com
