81ACE166-4_TDS.pdf

. HANDLING PROPERTIES
Technical Data Standard | Units | 72 F (22 C) | 77 F (25 C) | 85 F (29 C)
ACE-1 66 150g Pot Life ASTM 2471 minutes, 19-24 17-22 12-15
500g Pot Life ASTM 02471 minutes 19-24 16-21 12-15
AC E 262 Viscosity Mixed ASTM D2196 cP 1,150 880 610
–
MIX RATIO DENSITY
Method. Resin:Hardener Resin:Hardener State Units | 72 F (22 C)
The New ABSOLUTE CLEAR Weight 2.33:1 100:43.3 Cured _| Ib/gal (g/cc)| 9.68 (1.16)
a . is _ Weight Range 2.18:1-2.53:1__| 100:45.80-100:39.5 Resin _| Ib/gal (g/cc)|_ 9.77 (1.17)
Standard CLEAR COATING EPOXY- FAST Volume -2.00:1 100:50.0 Hardener | Ib/gal (g/cc) 8.42 (1.01)
co 5 Volume Range 1,89:1-2.19:1 100:52.8-100:45.6
la laeieilaied MECHANICAL PROPERTIES
Formulated for extremely clear coatings Property Standard Units 72 F (22 C) x2 wk
and laminations with carbon and other DurometerHardness ASTM D2240 TypeD | 92 –
EPOXIES for _ reinforcement fibers. Commonly used for Compression Yield ASTM D695 psi(MPa) | 11,700 (81)
. clear coatings on wood, surfboard Tensile Strength ASTM D638 psi (MPa) 8,340 (58) __
Laminating laminations and other boardsport products in tensile Hotuls an os psi os Aste (3.23)
j a production setting. Provides colorless clarit ensile Elongation | ASTM D638__| – 5
Infusion Syd uv stability, Forultimete long-term Uv Fra Strength [ASTM 790 | “psi(wPa)_| 18600 (64)
Tool stability, use with uv stable ee t. Flexural Modulus | __ASTMO780 pel (Gra) ASSE+08 (5.14)
7 ; ith a oat.
poling P THERMAL PROPERTIES
Assembly Tack-free time. ACE-262 hardener provides Property | Standard | Units 72 F (22 C) x2 wk
a tack-free cure time of less than two hours Tg DSC Onset-1st Heat ASTM E1356) F ( C) 118 (48)
at 85 F (29 C) and just under 3 hours at 72 F Heat Deflection Temperature | ASTM D648 | F ( C) | 117 (47)
> ralure =
(22 c). TACK-FREE TIME
y 05 pees fraps | |
Easy processing. Optimized for fill coats 2 7 f no ! : , |
and hand wet out of lightweight ees es i jue i | |
reinforcement fabrics or fibers. Provides an 5 D = : 7 a 38 Ee
extremely smooth surface when cured”. , Tack-Free Time (hours) ,
Excellent sandability. Reaches full physical eS ae
properties at room temperature cure. “To prevent water spotting, avoid contact with moisture until epoxy is thoroughly cured and top coated,
store PRO-SET Epoxy resins and hardeners at room temperature in sealed containers until shortly before use. As with many high-
. | performance epoxy resins, repeated exposure to low temperatures during storage may cause the resin to crystallize. if this occurs,
Shelf life is 3 years for resin and 2 years for warm the resin to 125 F and stir to dissolve crystals. Hardeners may form carbamation when exposed to CO, and moisture in the
hardener when properly stored?. atmosphere for extended periods of time. Prevent carbamation by protecting hardeners from exposure until immediately prior to
processing.
Rev 2 / Jan 2020 Test specimens were neat epoxy (without fiber reinforcement).
Typical values, not to be construed as specification,