WA ISO 9001:2008 Ya
7 ranscendia Certiec Compary emt
DESCRIPTION:
Oriented Polyester films are rigid plastics that are strong, smooth to matte surfaces. Available in sheets and rolls
durable, dimensionally stable, and have anti-curl with widths from .5″ to 92″ with 3″, 6″, and 10″ cores.
properties. They are suitable for graphics, packaging, Gauges are available from .00032″ to .014″, and special
electrical and industrial applications. Oriented Polyester surface treatments include ink adhesion, slip, and anti-
films are available in super-clear to clear matte, and static.
CHARACTERISTICS:
* Easily printed with water or solvent based inks using * Excellent chemical and abrasion resistance and
flexography, offset lithography, and screen printing. temperature resistance.
* Can be folded, sheeted, die cut, grommeted, glued, * General inertness and free of additives.
and sewn.
TECHNICAL DATA:
MECHANICAL PROPERTIES TYPICAL VALUES TEST CONDITIONS TEST METHOD-ASTM
MD >20 kg/mm?
TENSILE STRENGTH TD 320 kg/mm? 25 C D-882-64
MD 100 to 120%
ELONGATION AT BREAK 882-1
TD 100 to 120% esr D-882-84
2
F-5 VALUE MD 9.5 kg/mm 25 C D-882-64
TD 9.5 kg/mm?
IMPACT STRENGTH 400 g cm/cm? 25 C. 2541 film D-1709-62
TEAR STRENGTH – PROPAGATING 20 g/mil 25 C. 2541 film D-1922-61
ELMENDOPF INITIAL – GRAVES 800 g/mil 25 C. 254 film _ D-1004-66
BURSTING STRENGTH >5 kg/cm? 25 C. 2541 film D-774-63
FOLDING ENDURANCE 10 cycle 25 C. 25,1 film D-2176-63
PHYSICAL PROPERTIES
DENSITY 1.390 to 1.405 g/cm? 25 C D-1505-63
MOISTURE ABSORPTION .05 wt% 23 C, 24 hr D-570-63
WATER VAPOR 25 g/m*/24 hr 251 film @ 40 C. @ 100% R.H. E-98-66
TRANSMISSION RATE: OXYGEN 40 cm*/m#/24 hr 25u film @ 25 C.@ 1 atm D-1434-66
COEFFICIENT OF KINETIC 5
FRICTION: FILM/FILM STATIC OF 03 1008 ere D-1894-68
THERMAL PROPERTIES
MELTING POINT 280 C
SOFTENING POINT 250 C
HEAT SHRINKAGE 2.0 % 150 C X 30 min D-2305-67
SERVICE TEMPERATURE -70 to +150 C
SPECIFIC HEAT 0.3 cal g C 25 C
COEFFICIENT OF LINEAR THERMAL EXPANSION 3×10 cm/em/ C 30 C to 50 C D-696-44
COEFFICIENT OF THERMAL CONDUCTIVITY 3×10″ cal/om sec C
ELECTRICAL PROPERTIES
DIELECTRIC STRENGTH 7,500 volts/mil 25 C 60hz D-149-64
DIELECTRIC CONSTANT 33 25 C 60hz D-150-65
DIELECTRIC DISSIPATION 0.0025 25 C 60hz D-150-65
VOLUME RESISTIVITY 10 ohm-cm 25 C D-257-66 & D-2305-67
SURFACE RESISTIVITY 10″? ohm-cm/cm 23 C 80% RH. D-257-66
Note: The stated values are typical data and are not specification of guarantee. Transcendia suggests that purchaser confirm product compatibility prior to use of this product .
Stated values are believed to be accurate, but all information is presented without guarantee or responsibility on the part of Transcendia.
CORPORATE HEADQUARTERS 9201 W. Belmont Avenue | Franklin Park, IL 60131
USA 800.618.5060 | 847.678.1800 main | 847.233.0199 fax
CAN 800.268.4108 | 416.292.6000 main | 416.292.7399 fax
TRANSCENDIA.COM 2016 Transcendia Inc. All Rights Reserved.
(800) 281-4975
sales@revchem.com
