37MCEZ_TDS.pdf

. casey
(a Chem
Trend
– Release Innovation
Se
|
|
*hoDUCT DATA Ghemlease Mold Cleaner EZ
Description Handling and Storage
Chemlease Mold Cleaner EZ is a special blend of Chemlease Mold Cleaner EZ is flammable and must
HAP free* solvents designed to remove wax and be kept away from heat, sparks, and open flame. The
contaminants from composite molds. Chemlease can should be kept closed when not in use to prevent
Mold Cleaner EZ is ideal for preparing composite mold evaporation of flammable solvents. Store material in a
surfaces for the application of Chemlease mold cool location. Avoid breathing of vapor or spray mist
sealers and releasants. Chemlease Mold Cleaner EZ _ or prolonged contact with skin. Use only with
is also excellent for cleaning brushes and equipment. adequate ventilation. DO NOT take internally. In
confined areas, operators should wear respirators or
*HAPs are not formula constituents of this product. fresh air masks. Industrial grade solvent resistant
Standard manufacturing processes may result in trace gloves should be worn while using Chemlease
quantities [<0 .1%] of HAPs. materials. Application Packaging 1. Chemlease Mold Cleaner EZ should be applied Chemlease Mold Cleaner EZis available in to the mold surface with clean, 100% cotton 4-quart (1 liter), 1-gallon (4 liter), 5-gallon cloths. While the mold surface is still wet, (20 liter) and 55-gallon (208 liter) containers. vigorously wipe the mold dry with a second clean, dry, 100% cotton cloth. 2. Frequently exchange saturated cloths with new, Safety Data clean cloths. Material Safety Data Sheets are available for all 3. Repeat process several times (a minimum of two Chemlease products and should be consulted prior to cleanings is recommended) until all residues (dirt, Se of the product. dust, grease, moisture, etc.) are removed. 4. The mold is then ready for application with the appropriate Chemlease Mold Sealer and/or Chemlease Mold Release. NOTE: While the technical information and suggestions for use contained If you plan to use compounds or glazes, etc., prior to herein are believed to be accurate and reliable, nothing stated in this applying Chemlease Mold Sealer and/or Chemlease _llletinis to be taken as a warranty either expressed or implied. Mold Release, be sure to wipe clean with Chemlease Mold Cleaner EZ after doing so, as most buffing compounds will not allow Chemlease sealers and release agents to work properly. Prolonged exposure on the mold surface (puddling, dipping, etc.) should be avoided. Chem-Trend LP. 121608 1445 W. McPherson Park Drive, P.O. Box 860, Howell, Ml 48844.0860 Telephone: 517.546.4520 Facsimile: 517.548.5370 US/Canada: 800.727.7730 www.chemtrend.com Copyright 2004 Chem-Trend L-P., All Rights Reserved