37FK68_SDS.pdf

PAGE 1 OF 5
4. IDENTIFICATION OF CHEMICAL AGENT AND IDENTIFICASION OF THE MANUFACTURER |
TRADE NAME:
Edge WaX …..cscecsecsssseescsscsevessssceeessesseessseseesaenaeeseeseesactacereneesenseasessessees HOB
USAGE: Mold Release Product
SUPPLIER: FINISH KARE PRODUCTS, INC.
1726 FLORADALE AVE.
SOUTH EL MONTE, CA 91733
Telephone: 626-443-8983
Fax: 626-443-0288
Email: Sales@FinishKare.com
Emergency Telephone number: 800-535-5053 or 352-323-3500
| 2 COMPOSITION AND INFORMATIONON INGREDIENTS
COMPONENTS CAS# % WEIGHT OSHA PEL TWA EINECS CLASSIFICATION
Low odor base solvent 64742-47-8 35-55 5.0 mg/m3 200ppm Listed
Aromatic hydrocarbon* 64742-95-6 15-25 * Listed
Aliphatic hydrocarbon 8052-41-3 07-15 500ppm 100ppm Listed
Wax blend 8015-86-9 25-30
* Components- max %
1,2,4,Trimethyl benzene 95-63-6 32.0 25 25
Xylene 1330-20-7 2.2 100 100
Cumene 98-82-8 1.5 50 50
HEALTH: 1 FLAMMABILITY: 2 REACTIVITY: 0
THE HEALTH EFFECTS NOTED BELOW ARE CONSISTENT WITH REQUIREMENT UNDER THE OSHA
COMMUNICATION STANDARD (29 CFR 1910.1200)
Potential effects of health:
INHALATION (BREATHING): N/A because it is a Paste Product.
EYE CONTACT: Product is minimally irritating to the eyes.
CONTACT OF THE SKIN: Prolonged or repeated contact may result in de-fatting and drying of the skin.
INGESTION: Ingestion of product may result in vomiting; aspiration (breathing) of vomitus into the lungs must
be avoided as even small quantities may result in aspiration pneumonitis.
GENERAL ADVISE: In case of accident or if you feel sick from exposure, seek medical attention immediately
(Show the label to physician if possible).