37FK135_SDS.pdf

Revision Date: May, 2012 PAGE 1 OF 6
| 4. IDENTIFICATION OF THE SUBSTANCE/PREPARATION &CO.UNDERTAKING
FINISH KARE PRODUCTS, INC.
PRODUCT NAME 135T Total Polymer Release Agent
USAGE: Mold Release Product
CHEMICAL NAME Xylene Mixture (Release Product)
MANUFACTURER FINISH KARE PRODUCTS, INC.
South El Monte, CA 91733
Web site: www.FinishKare.com
Email: Sales@FinishKare.com
CUSTOMER SERVICE 1-626-443-8983 Fax: 1-626-443-8983
TRANSPORTATION EMERGENCY:
INFOTRAC 1-800-535-5053 U.S.A. (24 Hours/day)
INFOTRAC 1-352-323-3500 International Calls
Contract # 99669
COMPONENTS CAS# CONCENTRATION (%
Medium Aliphatic Solvent Naphtha 64742-88-7 5-8
Petroleum Distillate 64742-82-1 5-10
Xylene 1330-20-7 80-90
Resin Blend Proprietary 0-5
BHAZARDSIDENTIFICATION = -_
NFPA RATING: Health 2, Fire 3, Reactivity 0 HMIS
RATING: Health 2, Fire 3, Reactivity 0
O=MINIMAL, 1=SLIGHT, 2=MODERATE, 3=HIGH, 4=EXTREME
RISK STATEMENTS:
Flammable Liquid
R36/37/38 Irritating to eyes, respiratory system and skin.
R20/65 Harmful by inhalation may cause lung damage if swallowed.
SAFETY STATEMENTS:
S16 Keep away from sources of ignition. No smoking.
$29 Do not empty into drains.
$24/25 Avoid contact with skin and eyes.
EYE CONTACT: For eyes, flush with plenty of water for 15 minutes & get medical attention.
SKIN CONTACT: In case of contact with skin immediately remove contaminated clothing. Wash thoroughly with soap &
water. Wash contaminated clothing before reuse.
INHALATION: After high vapor exposure, remove to fresh air. If breathing is difficult, give oxygen. If breathing has
stopped give artificial respiration. Keep at rest. Call for prompt medical attention.
SWALLOWING: If swallowed, CALL A PHYSICIAN IMMEDIATELY! Do NOT induce vomiting. Have patient lie down &
keep warm. Vomiting may lead to pneumonitis, which may be fatal.