34226688_TDS.pdf

-=>- 26776 W. 12 Mile Road
oe eu Southfield, Ml 48034
oeFeua 248-353-4100 phone
age 248-948-6460 fax
Marshall Additive 800-338-7900 tall free
TECHNOLOGIES 888-014-8600 customer care
DIVISION OF THE RJ. MARSHALL COMPANY www.-Mat.rjmarshall.com
Typical Physical Properties
FDAD antimony trioxide is a high purity, white, odorless, crystalline
powder. Insoluble in water, it is soluble in concentrated hydrochloric
and sulfuric acids, and strong alkalies.
+820 mesh 0.05% max
Typical Chemical Properties
Arsenic 0.068% max
Antimony Trioxide has minimal effect on the physical and chemical properties of most polymers. For this reason, and for its
superior flame retardant synergism, Antimony Trioxide is the inorganic additive of choice for most applications.
HEALTH AND SAFETY: Refer to the Safety Data Sheet
PACKAGING: Bulk bag weight 1000 kg (2,200 Ibs.) or 50 Ib bags; pallet weight 2500 Ibs.
December 2019
Terms and Conditions of Sale: All statements, technical information and recommendations are based on tests we believe to be reliable, the accuracy or completeness is not
guaranteed, and the following is made in place of all warranties, expressed or implied. Qur only obligation is to replace product proved to be defective. We shall not be liable
for any injury, loss or damage, direct or indirect, from using or not being able to use the product. Before using, customer must determine the suitability of the product for
the intended use and customer assumes the responsibility. This statement may not be changed except by an agreement signed by an officer of The RJ. Marshall Company.