25TC9462-G_TDS.pdf

@ ~~ @
@ “>” @ B SHORE D SEMI-RIGID URETHANES
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
ENTERPRISES
dn ISO-9001 Certified company
TC-9462 A/B
CASTABLE HIGH PERFORMANCE 60 SHORE D
POLYURETHANE ELASTOMER
TC-9462 A/B is a two-component urethane casting compound that is specifically formulated for high abrasion and impact resistance.
It is recommended for use in the casting of highly wear-resistant parts and linings. This product is a safe, easy-to-handle, room
temperature mixing and curing system that does not contain TDI, MDI, MDA, or MOCA. TC-9462 A/B is relatively insensitive to
typical environmental moisture and will make good void-free parts. Because of this product’s exceptional toughness and abrasion
resistance, castings made with TC-9462 A/B are particularly suitable for mining and mineral process industries.
e High impact resistance * Low viscosity
Exceptionally tough, abrasion resistant Easy to handle
e Room temperature mixing and curing * Mercury free
PHYSICAL PROPERTIES TEST RESULTS
Hardness, Shore D 6025
Density (g/cc) 1.09
Cubic Inches per Pound 26
Color/Appearance Amber/Transparent
Tensile Strength (psi) 5,000
Tensile Modulus (psi) 2.19 x 104
Elongation (%) 525
Tear Strength (psi) 585
Flexural Strength (psi) 1,930
Flexural Modulus (psi) 4.78 x 104
Shrinkage (in/in) linear 0.002
Izod Impact, notched (ft-Ib/in) 14.0
HANDLING PROPERTIES | SES Part AE Se] Part B
Mix Ratio by weight | 60
Mix Ratio by volume a 58
Specific Gravity @ 77 F (25 C) 1.09
Color Amber
Viscosity (cps) @ 77 F (25 C) Brookfield [| oes0 isd 200
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield 2,450
Work Time, 100g mass @ 77 F (25 C) 15 minutes
Gel Time 25 minutes
Demold Time @ 77 F (25 C) 4-5 hours
Properties above are typical and not for specifications.
TC-9462 A/B Page 1 of2 Date: 03/25/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com