SAFETY DATA SHEET
Date Issued : 11/19/2008
SDS No : TC-5045 PART A
Date Revised : 05/29/2019
ENTERPRISES Revision No : 4
TC-5045 PART A
1. PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: TC-5045 PART A
GENERAL USE: Silicone rubber base
MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS
BJB Enterprises, Inc. CHEMTREC (USA & Canada): (800) 424-9300
14791 Franklin Avenue or (703) 527-3887 CCN# 2820
Tustin, CA 92780
Emergency Phone: (714) 734-8450
2. HAZARDS IDENTIFICATION
GHS CLASSIFICATIONS
This product does not meet the criteria for classification.
GHS LABEL
Not Applicable
3. COMPOSITION / INFORMATION ON INGREDIENTS
faienuesinana fies iY | i
4, FIRST AID MEASURES
EYES: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes.
Get medical advice/attention if irritation develops.
SKIN: Immediately wash skin with soap and plenty of water. Remove contaminated clothing. Get medical advice/attention if irritation or rash
develops. Wash clothing before reuse.
INGESTION: If swallowed, call a physician immediately. Do not induce vomiting unless directed to do so by medical personnel. Provided the
patient is conscious, wash out mouth with water. Never give anything by mouth to an unconscious person.
INHALATION: Remove to fresh air. Seek medical advice/attention if breathing becomes difficult or if respiratory irritation develops.
NOTES TO PHYSICIAN: Symptomatic and supportive therapy as needed. Following severe exposure medical follow-up should be
monitored for at least 48 hours.
5, FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Carbon dioxide, dry chemical, or alcohol-resistant foam.
HAZARDOUS COMBUSTION PRODUCTS: Carbon monoxide, carbon dioxide, formaldehyde, and silicon oxides.
FIRE FIGHTING PROCEDURES: Cool fire exposed containers with water spray. Remove containers from the fire area if possible. Do not
release runoff from fire control methods to sewers or waterways.
FIRE FIGHTING EQUIPMENT: Firefighters should wear positive pressure self-contained breathing apparatus (SCBA) and consider use of
unmanned hose holders or monitor nozzles for fighting large fires.
6. ACCIDENTAL RELEASE MEASURES
SPILL AND LEAK PROCEDURES: Evacuate unnecessary personnel from the spill area. Eliminate all sources of ignition. Ensure adequate