BB Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
ENTERPRISES
Au 1SO-9001 Certified company
FIRE RETARDANT FLEXIBLE FOAM RoHS
6 LB DENSITY
TC-296 FR A/B is a 6 Ib. medium density, water blown flexible foam with fire retardant properties. This product was developed due to
ongoing demand for fire retardant foams in the industries of Movie Special Effects, Theme Parks, Haunted Houses, and Theatrical
Performance. Firmness of the foam can be controlled by mold temperature and the amount loaded in the mold. BJB s 6800 Series
Pigments may be added to the B side for developing a wide range of colors. TC-296 FR A/B can be hand mixed, machine
dispensed, or mixed with a Jiffy Mixer .
Prototypes Medical training devices
Prosthetics * Movie props/ Special effects
MEETS THE FOLLOWING:
D.O.T. Flammability of Interior Materials – FMVSS 302
HANDLING PROPERTIES | PatA si Part B
Mix Ratio by weight a 100
Specific Gravity @ 77 F (25 C) 1.188 1.054
Color Pale Yellow Off White
Viscosity (cps) @ 77 F (25 C) Brookfield 1500
Density, (free rise) Ibs/ft 6
Density, (free rise) kg/m? 96.1
Cream Time 20 25 seconds
Rise Time 1.25 1.5 minutes
Tack Free Time 6 7 minutes
Demold Time 20 30 minutes
Properties above are typical and not for specifications,
*The density and processing times listed are derived from a statistical average of long-term testing. We recommend a test mix be
performed before use. BJB quality control tests and product packaging are based on the 50/100 pbw ratio.
i Mixing is best with a high speed drill or air motor with a Jiffy Mixer .
Ee eRe Ly 10-12K 9 9-10X ee The blade shears the material and provides a thorough mix within the 8
) iy CNSR somal to 10 second period generally established for achieving a uniform blend.
Bl sae: , Mixing too long or not enough can result in poor material performance.
3Ib 4lb 6b Bib Once mixed, the material should be immediately poured. If too much
eel | time goes by, the foam will rise in the mix container and the batch may
sj be lost.
a When pouring the foam, avoid trying to scrape any material from the
fees A eae container sidewalls or bottom. Generally, there isn t enough time to do
_ Polysoftt polysott TC-296 FR ee this and more importantly there may be material that is not well mixed
Hite pice on the container sides.
TC-296 FR A/B_ Page 1 of 2 Date: 11/28/2018
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www. bjbenterprises.com