25SP20044F_SDS.pdf

SILPAK, Tin sarery pata sneer
Tr CHEMICAL AND COMPANY IDENTIFICATION 4, FIRST AID MEASURES
Product Identifier. SP 200-4 A, SP 400-6 A, SP100-8 A, INHALATION: Remove person to fresh air. if not breathing, give mouth to
SP 400-15 A mouth resuscitation. If breathing is difficult, give oxygen. Consult a
physician immediately.
Use: Component for Polyurethane Flexible Foam; SKIN CONTACT: Remove contaminated clothing. Wash contact area
Professionalindustial use with warm water and soap. Wash contaminated clothing before reuse.
EYE CONTACT: Immediately fush eyes with plenty of water for 18
Company: SILPAK, INC. minutes, hoKing eye lids open to be sure the material is washed out.
470 EAST BONITA AVE. POMONA, CA 91767 Consult a physician immediately.
Phone Number: 909-625-0056 INGESTION: Do not induce vomiting. No adverse anticipated by this
Emergency Phone: CHEMTREC 1-(800)-424-9300 route of exposure. Get medical attention.
Email silpak@aol.com HOST IMPORTANT SYMPTOMSIEFFECTS: May cause skin and eye
compresses eee peg irritation. Vapors or mists may cause respiratory irritation. May cause
2- HAZARDS IDENTIFICATION allergic respiratory reaction in sensitized persons, resulting in wheezing,
GHS HAZARD CLASSIFICATION: shortness of breath, and difficulty breathing.
Acule Toxicty Inhalation Category 4 INDICATION OF {MMEDIATE MEDICAL ATTENTIONISPECIAL
Skin ieitation Category 2 TREATMENT: Required for asthmatic symptoms or serious inhalation
Eye Irritation Category 2 exposures. Respiratory systems, including pulmonary edema, ray be
Respiratory Sensiizaton Category 1 delayed. Persons receiving significant exposure should be observed 24-
Specific Target Organ Toxicity Category 3 48 hours for signs of respiratory distress. Persons sensitized to
{Respiratory trritation) Diisocyanates should consult a physician before working with respiratory
ititants or sensitizers
SIGNAL WORD: WARNING! peer au RAPER RTIBE:
EXTINGUISHING MEDIA: Use water fog, foam, carbon dioxide or dry
chemical, Oo not use solid water stream. Solid stream of water into hot
Contains Diphenylmethane Diisocyanate (MOI, isocyanate) product may cause il stam generation oreupfon coton dt
|AZARDS: Water contamination will produce Car le.
HAZARD STATEMENTS: Do not re-seal contaminated containers as pressure buildup may rupture.
May be harmful if inhaled; May cause respiratory irritation; Causes mild SPECIAL PROTECTIVE EQUIPMENT & PRECAUTIONS FOR
skin irritation; Causes serious eye iritafon; May cause allergy or asthma FIREFIGHTERS: Wear approved positive pressure, self-contained
symptoms or breathing difficulties if inhaled; May cause an allergic skin breathing apparatus and full body protective clothing.
reaction; May cause damage to organs through prolonged or repeated & SENT i cECEASEE EAS
exposure. . ACCIDENTAL RELEASE MEASURE
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND
PRECAUTIONARY STATEMENTS: EMERGENCY PROCEDURES: Clear non-emergency personnel from the
Do not handle until all safety precautions have been read and understood; area. Ventilate area. Wear appropriate protective clothing to prevent eye
Avoid breathing fumesimist’vaporsispray; Wash thoroughly after handling; and skin contact and respiratory protection.
Wear protective gloves! protective clothing! eye protectioface protection; METHODS AND MATERIALS FOR CONTAINMENT AND CLEANUP:
In case of inadequate ventiation, wear respiratory protection; Take off Cover with an inert absorbent material and collect into an appropriate
contaminated clothing and wash before reuse. container for disposal. Do not seat the container since COzis generated
; on contact with moisture and dangerous pressure buildup can occur.
IF ON SKIN: Wash with ptenty of soap and water. Decontaminate floor area with a mixture of water plus isopropyl alcohol
IF INEYES: Rinse cautiously with water for several minules. Remove (25%), household ammonia (15%), and detergent (5%).
contact lenses, if present and easy to do. Continue rinsing.
IF INHALED: If breathing is difficult, remove person to fresh air and keep 7/ HANDLING AND STORAGE
| at est n a positon comfrtable for beating. HANDLING: Avoid inhatation of vapors and spray mists. Use in well- H
. ner i lated areas. Avoid contact with skin and eyes. Wash thoroughly after
Store in a well ventilated place. Keep container tightly closed. ven c
Dispose of contents and container in aocordance with loca, regional and handing, Do not eat drink or smoke in the work area. Keep container
national regulations. STORAGE: Store indoors at temperatures between 65F and 75F (18C &
24C). Recommend storage in original, unopened containers. Protect
Individuals sensitized to isocyanates should discontinue use. Long-term tofomcoe Jeading to potentially dangerous pressure buildup in sealed
overexposure to isocyanates may cause lung damage. This is one part of /
a two-component system, Read and understand the hazard information EXPOSURE CONTROL PERSONAE PROTECTION
on part B before using, }, EXPOSURE CONTROL) FEROUNAL TRUIE aN
m “3 OCCUPATIONAL EXPOSURE LIMITS:
3: COMPOSITION TINFORMATION ON INGREDIENTS [revgenatae nase | wast | atom |
CHEMICAL. CASNO. | WGT.% (PEL – OSHA Permissible Exposure Limit, TLV ACGIH Threshold Limit
4A-Diphenylmethane Diisocyanate | 101-688 25.60 Value; TWA Time Weighted Average)
Modified MOL [NE | 30-50 VENTILATION: Use with adequate general or local exhaust ventiaion to
Ingredients not precisely identified are proprietary or not hazardous. maintain exposure levels below the occupation exposure limits.
NE-Non Existent.
|
: |