25FP903-F_SDS.pdf

e
Pile SHORE A POLYURETHANES
ri 3) Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
ENTERPRISES
An ISO-9001 Certified company
FP-90 REV 1 A/B JS
90 SHORE A POLYURETHANE ELASTOMER
RoHS
BIB s FP (Fast Production) Series of products range from a 15 to 90 Shore A. You’ll find their 4 to 5 minute work time can easily be
demolded, tack free and tough in under an hour. The 1:2 ratio and low viscosity makes these translucent materials easy to mix, pour
and pigment. FP-90 REV 1 is ideal for hand casting or dispensed with our CPE equipment.
* RoHS/REACH Compliant Demold in under an hour Translucent and easy to pigment
4.5 minute work time Low viscosity and easy to mix arti ideal for dispense
PHYSICAL PROPERTIES ELEVATED TEMPERATURE CURE*
Hardness, Shore A 9025
Density (g/cc) 1.097
Cubic Inches per Pound 26.03
Color/Appearance Clear Amber
Tensile Strength (psi) 2,250
Tensile Modulus (psi) 4,000
Elongation (%) 430
Tear Strength i 240
Shrinkage (in/in) linear 0.0046″
Dielectric Constant, 1 MHz 4.704
Dissipation Factor, 1 MHz 0.0435
*Note: Reported physical properties are based on test specimens cured 2 hours at room temperature then 16 hours at 160 F (71 C).
*Shrink test specimens are cured for 24 hours at room temperature and then 16 hours at 160 F (71 C).
HANDLING PROPERTIES eectuce Pato Part B
Mix Ratio by weight 100
Mix Ratio by volume ae es 100
Specific Gravity @ 77 F (25 C) 1.039
Color Amber
Viscosity (cps) @ 77 F (25 C) Brookfield 870
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield 1,500
Work Time, 100g mass @ 77 F (25 C) 4-4.5 minutes
Gel Time 5-5.5 minutes
Demold Time @ 77 F (25 C) 60 90 minutes
Properties above are typical and not for specifications.
FP-90 A/B REV | Page | of 2 Date: 07/15/2022
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com