25F116-G_SDS.pdf

Pee ag SHORE A POLYURETHANES
@ Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
ENTERPRISES
An 150-9001 Certified company
F-116 REV 1 A/B Jf
15 SHORE A POLYURETHANE ELASTOMER
RoHS
BJB s F-1 Series , with its 3 to 10 minutes of work time, addresses the need for shorter processing times and higher part
production. These 5 to 95 Shore A products exhibit excellent physical properties and easily process at room temperature. You’ll
also find the easy mix ratio to be extremely convenient. F-116 REV 1 can be cartridge-dispensed with our CPE handheld dispense
equipment. For longer work times consider our M Series or L Series of elastomers.
e RoHS/REACH Compliant e Easy to Pigment e High Tensile & Tear Strength
e Special Effects & Props * Medical Training Models e Mercury/Phthalate Free
PHYSICAL PROPERTIES ee
Hardness, Shore A 1545
Canal TBS 1017
Cubic Inches per Pound 27.62
Color/Appearance Translucent Pale Amber
Tensile Strength (psi) 600
Tensile Modulus (psi) 70
Elongation (%) 1,220
Tear Strength (pli) 65
Shrinkage (in/in) linear _ ASTM D2566 @ 1 depth 0.001*
Dielectric Constant, 1 MHz ASTM D150-87 5.334
Dissipation Factor, 1 MHz 0.0452
*Note: Reported physical properties are based on test specimens cured 1-3 hours at room temperature then 16 hours at 160 F (71 C).
*Shrink test specimens are cured for 24 hours at room temperature and then 16 hours at 160 F (71 C).
HANDLING PROPERTIES Part B
Mix Ratio by weight 100
Mix Ratio by volume (cartridge dispense friendly) 99
Specific Gravity @ 77 F (25 C) 1.04
Color Pale Amber
Viscosity (cps) @ 77 F (25 C) Brookfield 4,100
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield 1,200
Work Time, 100g mass @ 77 F (25 C) 4-5 minutes
Gel Time 8 9 minutes
Demold Time @ 77 F (25 C) 1-2 hours
Properties above are typical and not for specifications.
F-116 REV 1 A/B Page | of 2 Date: 12/03/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com