Vy SILP N Inc SAFETY DATA SHEET: Page 1
1. Identification 3. Composition/Information on Ingredients
Product Identifier: | RU-480 Liquid Rubber Part A
Product Code(s): SPRU480A
Use: Component for Polyurethane Mold Rubber. For
Industrial/Professional use only. Exact concentrations are withheld as trade secret. Other ingredients
Manufacturer: Polytek Development Corp. are not listed because they are either not hazardous or are below
55 Hilton St., Easton, PA 18042 USA concentration/cut-off thresholds.
Phone Number: 800-858-5990 (8 a.m. to 6:30 p.m. EST) . 5
Emergency Phone: CHEMTREC 800-424-9300 or & First-Aid Measures
+1 703-527-3887 Eye Contact: Rinse thoroughly with water for at least 15 minutes,
E-mail: sds@polvtek.com holding the eyelids open to be sure the material is washed out. Get
medical attention if irritation develops or persists.
2. Hazards Identification Skin Contact: Remove contaminated clothing. Wash contact area
GHS Classification: thoroughly with soap and water. Get medical attention if irritation
Acute Toxicity (Inhalation) ~ Category 4 develop or persist. Launder clothing before reuse. Discard items that
Skin Irritation Category 2 cannot be decontaminated. ;
Eye Imitation Category 2A Inhalation: Remove person to fresh air. Give artificial respiration if
Respiratory Sensitization Category 1 needed. If breathing is difficult, oxygen should be administered by
Skin Sensitization Category 1 qualified personnel. Get immediate medical attention.
Carcinogenicity Category 2 Ingestion: Do not induce vomiting unless directed to do so by medical
Label Elements: Danger personnel. Get medical attention if you feel unwell.
Most Important Symptoms/Effects: Causes skin and eye irritation.
Vapors or mists may cause respiratory irritation. May cause allergic skin
Hazard Phrases and/or respiratory reaction in sensitized persons. Symptoms include skin
H315 Causes skin irritation. rash, wheezing, shortness of breath and other asthma symptoms.
317 May cause an allergic skin reaction. Indication of Immediate Medical Attention/Special Treatment:
H319 Causes serious eye irritation. Immediate medical attention is required for asthmatic symptoms or
332 Harmful if inhaled. serious inhalation exposures. Respiratory symptoms, including
334 May cause allergy or asthma symptoms or breathing pulmonary edema, may be delayed. Persons receiving significant
difficulties if inhaled. exposure should be observed 24-48 hours for signs of respiratory
H351 Suspected of causing cancer. distress. Persons sensitized to Diisocyanates should consult a physician
Precautionary Phrases before working with respiratory irritants or sensitizers.
P203 Obtain, read and follow all safety instructions before use. gare oa
P261 Avoid breathing fumes, vapors, mists or sprays. 5. Fire-Fighting Measures
P264 Wash thoroughly after handling. Extinguishing Media: Use water fog, foam, carbon dioxide or dry
P271 Use only outdoors or in a well-ventilated area. chemical. Do not use solid water stream. Solid stream of water into hot
P272 Contaminated clothing should not be allowed out of the product may cause violent steam generation or eruption.
workplace. Specific Hazards: Not classified as flammable or combustible. Product
P280 Wear protective gloves, protective clothing, eye protection, and | will bum under fire conditions.
face protection. . ; Special Protective Equipment & Precautions for Fire-Fighters: Wear
P284 _In case of inadequate ventilation wear respiratory protection. | positive pressure, self-contained breathing apparatus and full-body
P302+P352 IF ON SKIN: Wash with plenty of soap and water. protective clothing. Cool fire-exposed containers with water.
P304+P340 IF INHALED: If breathing is difficult, remove person to
fresh air and keep comfortable for breathing. 6. Accidental Release Measures
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several | personal Precautions, Protective Equipment and Emergency
minutes. Remove contact lenses, if present and easy to do. Procedures: Remove all ignition sources. Clear non-emergency
Continue rinsing. personnel from the area. Ventilate area. Wear appropriate protective
P317 Get medical help. ; ; clothing to prevent eye and skin contact and respiratory protection.
Pass 8 i exposed or concemed, get medical aves help. Methods and Materials for Containment and Cleanup: Cover with an
P337+P317 If eye irritation persists: Get medical help. ae ai Dent ath and barsien into yar mare potraed for
P342+P316 If experiencing respiratory symptoms: Get emergency tsposa . Do not sea! the confainer since CO2 is generated on contact
medical help immediately with moisture and dangerous pressure buildup can occur. Decontaminate
P362+P364 Take off contaminated clothing and wash before reuse. Floor area rth miznane of wate: piss isopeopy/ alcobel (10-20%),
P405 Store locked up. jouschold ammonia (10%), and detergent (2%)
P501 Dispose of contents and container in accordance with local, 7. Handling and Storage
regional and national regulations. – Safe Handling: Avoid breathing fumes, vapors, mists or sprays. Use
Supplemental Information: Individuals sensitized to isocyanates should | ith adequate ventilation. Avoid contact with the eyes, skin and clothing.
discontinue use, Long-term overexposure to isocyanates may cause lung | wach, thoroughly after handling. Do not eat, drink or smoke in the work
damage. This is one part of a two-part system. Read and understand the | area. Keep container closed when ot in use.
hazard information on part B before using. Safe Storage: Store indoors at temperatures between 55 F and 95 F
(13 C and 35 C). Store in original, unopened containers. Protect from
Date Prepared/Revised: January 20, 2023
XAEH&SSDS’SilpakRU-480A.docx
(800) 281-4975
sales@revchem.com
