GreenChem.
Technical Specifications
Product: Styrene Monomer 50T
Items Units Specifications
Cn
ee
roymercmet
222 Clematis Street e Suite 207 e West Palm Beach, FL 33401
(561) 659-2236 e (561) 659-2237 fax e info@greenchemindustries.com
ia
QS)
GreenChem.
Technical Specifications
Product: Styrene Monomer 50T
Items Units Specifications
Cn
ee
roymercmet
222 Clematis Street e Suite 207 e West Palm Beach, FL 33401
(561) 659-2236 e (561) 659-2237 fax e info@greenchemindustries.com
ia
QS)
GreenChem.
Technical Specifications
Product: Styrene Monomer 50T
Items Units Specifications
Cn
ee
roymercmet
222 Clematis Street e Suite 207 e West Palm Beach, FL 33401
(561) 659-2236 e (561) 659-2237 fax e info@greenchemindustries.com
ia
QS)
Technical Data Sheet
Dow Propylene Glycol USP/EP
General Propylene Glycol USP/EP (PG USP/EP), referring to the United States and European
Description Pharmacopoeias, is a high-purity grade of monopropylene glycol for use in pharmaceutical,
food, cosmetic, personal care, flavor and fragrance, plus a variety of other applications.
The clear, colorless, practically odorless, slightly viscous, water-soluble and hygroscopic
liquid with low vapor pressure is produced and handled in compliance with current Good
Manufacturing Practice (CGMP) guidelines.
PG USPIEP is tested for compliance with the current USP, EP, and Japanese
Pharmacopoeia (JP) specifications plus the Food Chemical Codex (FCC); it also complies
with the Brazilian Pharmacopoeia, and other pharmaceutical, cosmetic and food regulations
in the global markets where it is sold. It is listed by the Cosmetic, Toiletry and Fragrance
Association as an approved ingredient in cosmetics and its use is reviewed by the Cosmetic
Ingredient Review (CIR). PG USP/EP is Kosher certified and complies with Halal
requirements.
Typical Chemical Name 1,2-Propanediol
Component Formula CH,-CH(OH)-CH,OH; C,H,0,,
Properties Molecular Weight (g/mol) 76.10
CAS Number 57-55-6
EINECS Number 200-338-0
Assay > 99.8% by weight
Water < 0.2% by weight
Boiling Point, 101.3 kPa (1 atm) 187 C (369 F)
Distillation Range, 101.3 kPa (1 atm) 186-189 C (367 F-372 F)
Vapor Pressure, 20 C (68 F) 0.011 kPa (0.08 mm Hg)
25 C (77 F) 0.017 kPa (0.13 mm Hg)
Freezing Point Super cools
Pour Point <-57 C (-71 F)
Specific Gravity 20/20 C (68/68 F) 1.038
25/4 C (77/39 F) 1.033
60/4 C (140/39 F) 1.007
Refractive Index n20/D, 20 C (68 F) 1.4310-1.4330
Viscosity, 25 C (77 F) 48.6 centipoise (mPa.s)
60 C (140 F) 8.4 centipoise (mPa.s)
Specific Heat, 25 C (77 F) 2.51 Jig?K
Surface Tension, 25 C (77 F) 36 mN/m
Flash Point, Pensky-Martens Closed Cup 104 C (220 F)
Autoignition Temperature 371 C (700 F)
Thermal Conductivity, 25 C (77 F) 0.2061 Wim?K
Electrical Conductivity, 25 C (77 F) 10 micro Sim
Heat of Formation 422 kJ/mol (-101 Keal/g-mol)
Heat of Vaporization, 25 C (77 F) 67.0 kJ/mol
1. These are typical values and should not be construed as specifications.
Page 1 of 3 Trademark of The Dow Chemical Company ( Dow ) or an affilated company of Dow Form No. 117-20801-05/16
Propylene Glycol USPIEP
Page 1 of 1
Technical Data Sheet
Odorless Mineral Spirits
Test Unit Method Min Max Qualitative
Aromatics ppm ASTM E-169 – 1000 –
Distillation DP FAH ASTM D-86 – 395 –
Distillation, IBP FAH ASTM D-86 330 – –
Flash Point, TCC FAH ASTM D-56 115 – –
Odor – Smell – – Pass
Saybolt Color SAY ASTM D-6045 30 – –
Specific Gravity 60/60 F – ASTM D4052 0.740 0.770 –
These specifications are typical and represent the quality of our product in general. The information
herein is to assist customers in determining whether out product is suitable for their applications. Our
product is intended for sale to industrial and commercial customers. We recommend that customers inspect
and test our products before use and satisfy themselves as to content and suitability. We warrant that our
products will meet our written specification. Nothing herein shall constitute any other warranty expressed
or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent
to be inferred. Health and safety information, as well as safe handling instructions are available through
our Safety Data Sheet for this product. For more information about our products, please call (323)245-
2345.
Chemical Distributor
P.O. Box 39524
4578 Brazil Street
Los Angeles, CA 90039
Tel: (323) 245-2345
(818) 242-8486
Fax (818) 242-7804
www.aglayne.com
Technical Data Sheet
Mineral Spirits
Property Units Limits Results Method
Purity
Appearance
Color Saybolt >28 30
PH
Water
Density @ 15.6C API 43.2 57.5 54.3 ASTM D 4052
Disclaimer: These specifications represent the quality of our product in general
and may vary from batch to batch and producer to producer. If you are looking
for particular specifications please call our office or email your representative.
Shell Oil and Chemical Distributor
P.O. Box 39524
4578 Brazil Street
Los Angeles, CA 90039
Tel: (323) 245-2345
(818) 242-8486
Fax (818) 242-7804
www.aglayne.com
Interplastic Corporation makes no warranties regarding any material and/or samples described in this report. All properties
specified above are approximate and may vary from material delivered. Delivered material complies with the Certificate of
Analysis on each shipment of product. Interplastic Corporation makes no representations of fact regarding the material
except those specified above. Final determination of part or application and the suitability of the material for the use
contemplated is the sole responsibility of the buyer. Our technical sales representatives will assist in developing procedures
to fit individual requirements as a customer accommodation, but all advice is accepted at your risk and should be checked for
suitability to your particular processes and needs. These test data and properties are based on results obtained for a specific
material under the specified test conditions. They are not to be used as specifications and are not warranted as performance
attributes for any product or system.
INTERPLASTIC CORPORATION
2015 Northeast Broadway Street
Minneapolis, Minnesota 55413-1775
651.481.6860 Fax 612.331.4235
www.interplastic.com
Revised: 10/2022
COR50-ZZ-00805 is methyl methacrylate monomer (MMA). MMA is a colorless liquid for industrial use primarily as a
reactive solvent (diluent) for polymerization. MMA contains a small amount of stabilizing inhibitor to prevent premature
polymerization.
APPLICATION TYPICAL PROPERTIES
Colorless industrial reactive diluent for polymerization Methyl Methacrylate
Viscosity 0.53 cPs
APHA Color, maximum 10
Specific Gravity, 25 C 0.939
Flash Point, C 10
COR50-ZZ-00805
Reactive Diluent Solution
Technical Data Sheet
Interplastic Corporation makes no warranties regarding any material and/or samples described in this report. All properties
specified above are approximate and may vary from material delivered. Delivered material complies with the Certificate of
Analysis on each shipment of product. Interplastic Corporation makes no representations of fact regarding the material
except those specified above. Final determination of part or application and the suitability of the material for the use
contemplated is the sole responsibility of the buyer. Our technical sales representatives will assist in developing procedures
to fit individual requirements as a customer accommodation, but all advice is accepted at your risk and should be checked for
suitability to your particular processes and needs. These test data and properties are based on results obtained for a specific
material under the specified test conditions. They are not to be used as specifications and are not warranted as performance
attributes for any product or system.
INTERPLASTIC CORPORATION
2015 Northeast Broadway Street
Minneapolis, Minnesota 55413-1775
651.481.6860 Fax 612.331.4235
www.interplastic.com
Revised: 10/2022
COR50-ZZ-00805 is methyl methacrylate monomer (MMA). MMA is a colorless liquid for industrial use primarily as a
reactive solvent (diluent) for polymerization. MMA contains a small amount of stabilizing inhibitor to prevent premature
polymerization.
APPLICATION TYPICAL PROPERTIES
Colorless industrial reactive diluent for polymerization Methyl Methacrylate
Viscosity 0.53 cPs
APHA Color, maximum 10
Specific Gravity, 25 C 0.939
Flash Point, C 10
COR50-ZZ-00805
Reactive Diluent Solution
Technical Data Sheet
Interplastic Corporation makes no warranties regarding any material and/or samples described in this report. All properties
specified above are approximate and may vary from material delivered. Delivered material complies with the Certificate of
Analysis on each shipment of product. Interplastic Corporation makes no representations of fact regarding the material
except those specified above. Final determination of part or application and the suitability of the material for the use
contemplated is the sole responsibility of the buyer. Our technical sales representatives will assist in developing procedures
to fit individual requirements as a customer accommodation, but all advice is accepted at your risk and should be checked for
suitability to your particular processes and needs. These test data and properties are based on results obtained for a specific
material under the specified test conditions. They are not to be used as specifications and are not warranted as performance
attributes for any product or system.
INTERPLASTIC CORPORATION
2015 Northeast Broadway Street
Minneapolis, Minnesota 55413-1775
651.481.6860 Fax 612.331.4235
www.interplastic.com
Revised: 10/2022
COR50-ZZ-00805 is methyl methacrylate monomer (MMA). MMA is a colorless liquid for industrial use primarily as a
reactive solvent (diluent) for polymerization. MMA contains a small amount of stabilizing inhibitor to prevent premature
polymerization.
APPLICATION TYPICAL PROPERTIES
Colorless industrial reactive diluent for polymerization Methyl Methacrylate
Viscosity 0.53 cPs
APHA Color, maximum 10
Specific Gravity, 25 C 0.939
Flash Point, C 10
COR50-ZZ-00805
Reactive Diluent Solution
Technical Data Sheet
8/20/24, 2:32 PM Eastman Ethyl Acetate, Urethane Grade | TDS | Eastman Chemical Company
Bc lick for PDE
[p2Eastman logo
Technical Data Sheet
Eastman Ethyl Acetate, Urethane Grade
CAS No. 141-78-6
Application/Uses Key Attributes
= Coatings – Automotive OEM = Excellent solvent activity
= Coatings – Automotive Refinish = Fast evaporation rate
Coatings – Can and Coil High electrical resistance
= Coatings – General Industrial = Inert – Food use with limitations
Coatings – Industrial Maintenance and Inert – Nonfood use
Marine = Low MIR value
Coatings – Industrial Wood = Low surface tension
Coatings – Misc. (Thinners and Purge Mild odor
Solvents) = Non-HAP
= Coatings – Transportation = Non-SARA
= Denaturant for ethy! alcoho! = Readily biodegradable
= Graphic Arts – Flexographic and Gravure Urethane grade
Printing Inks
Product Description
Eastman Ethyl Acetate, Urethane Grade is a low-boiling, fast-evaporating solvent with a
mild, pleasant odor. It is widely used in formulating printing inks, adhesives, and lacquers.
It is a non-HAP solvent with excellent activity for most coating resins. Ethyl acetate is
miscible with most organic solvents and can be used in cleaner blends fo the removal of
oils, grease, and soils.
The chemical! substances for this product are listed as Inert Ingredients Permitted for Use
in Nonfood Use Pesticide Products, and in Food Use Pesticide Products with limitations,
under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA). For details on
specific permissions, click here.
Typical Properties
Property Typical Value, Units
Acidity _as Acetic Acid 0.005 wt % max.
Assay 99.8 wt % min.
Autoignition Temperature 485 C (905 F)
Azeotropes
BP 70.4 C (158.7 F)
Wt % Water 8.5 wt %
Blush Resistance @ 80 F (26.7 C) 39% RH
Boiling Point @ 760 mm Hg 75.5-78.5 C (168-173 F)
Color Pt-Co 10 max.
Critical Pressure 38.3 ATM
Critical Temperature 250.1 C
Critical Volume 286 ml/g-mol
Dilution Ratio
Toluene 3.1
file:///C:/Users/local_AMartinez/INetCache/Content.Outlook/SBLVWSGLIMEK TDS.html 412