MAR-KOME Technical Data
RAM-KOTE RELEASE AGENTS
Buffing Compound SL-420
Cee aE
Product Description:
A soft white water base polishing/buffing paste. Medium coarse Rapid Cut.
For use on Gel-coated fiberglass/composite tooling and other hard surfaces. A medium
coarse Aluminum Oxide grit that provides good cutting ability with a medium gloss
finish. To obtain higher gloss if needed or desired follow using a finer grit polishing
compound.
Typical Physical Characteristics:
Weight per Gallon 11.6
Viscosity Paste
Boiling point 212 Deg. F.
(complete water base)
Shelf life One Year from shipment date.
Application:
Apply by brush or wipe to finished part or Gel-Coated tooling surface, spread evenly
with buffing pad to small areas and start use with the buffing machine. For best results
Recommend the use of a twisted all-wool buffing pad @ 2400 RPM buffing speed. Use
firm or harder pressure to start with in buffing out sanding marks and other imperfec-
tions, followed with lighter pressure as smoothness and gloss appears. More than a sin-
gle application may be needed depending on fineness of surface sanding or other
imperfections.
The data on this sheet represent typical values. Since application variables are a major factor in product performance, this information should only serve as,
A general guide. MAR-KOTE assumes no obligation or liability of this information, unless Mar-Kote agrees otherwise in writing MAR-KOTE makes no
Warranties, express or implied, and disclaims all implied warranties including warranties of merchantability or fitness for a particular use or freedom from
Patent infringement Mar-Kote will not be liable for any special, incidental or consequential damages. Your only remedy for any defect in this product is
the replacement of of the defective product or a refund of the purchase price at our option.
MAR-KOTE PRODUCTS LLC P.O. Box 2080 Chino Hills CA. 91709 (909) 553-4236