37FE407_TDS.pdf

EVERC@AT TECHNICAL DATA SHEET
PRODUCT: POLYESTER GLAZING PUTTY
PART
NUMBER: 100400 20 oz. can 12 units/case
100407 % Gallon can 4 units/case
DESCRIPTION: Polyester Glazing Putty is ultra-smooth paste putty that easily fills grind marks,
pinholes, low spots and other minor imperfections. It also can be used to fill
minor body damage up to 1/8 deep. Polyester Glazing Putty contains ZNX-7
for superior adhesion to galvanized steel, bare steel, aluminum, SMC, E-coat and
cured OEM finishes. Blue cream hardener included. Can also be used to fill
minor body damage up to 1/8 (3 mm) in depth.
APPROVED
SUBSTRATES:
= Sanded Body Filler = Steel
= SMC = Aluminum
= Fiberglass = Galvanized Steel
AQ = E-Coat = Sanded OEM Paint
NOTE: For flexible plastics, use POLY-FLEX Flexible Glazing Putty.
PREPARATION:
rary * Clean and degrease the entire panel to be repaired with soap and water,
e) followed by a mild cleaning solvent.
k at Thoroughly dry the surface before repairing.
Use 80-180 grit to remove or scuff the paint and featheredge.
MIXING:
Place the desired amount of material on a clean, non-fibrous surface. Knead
_ the cream hardener before use.
Measure hardener 2% by weight (add a ribbon of cream hardener from edge
to edge across the center of a 4 (10 cm) diameter puddle.
Puddles larger than 4 in diameter will require additional hardener.
Mix thoroughly until uniform color is achieved.
Approximate setting time is 2.5 – 5 minutes @ 72 F (22 C)
EVERC&AT
a division of Illinois Tool Works Inc. | 6600 Cornell Road | Cincinnati, OH 45242 | (513) 489-7600
Made and Printed in the U.S. | 2015 Evercoat
evercoat.com
100-211-100400-TDS
2.2015