SILMAR SIL66BQ-250 / SIL66BQ-250A
a Laminating Resin
INTERPLASTIC CORPORATION Technical Data Sheet
Thermoset Resins Division
SIL66BQ-250 has low viscosity for easy wet out and is promoted for room temperature cure.
SIL66BQ-250 can be used as a sanding resin, hot coat or for finishing. It dries tack free with
a slight wax bloom.
This resin is also suitable for flooring use in meat and poultry processing facilities that must
conform to USDA requirements.
SIL66BQ-250A is especially designed for hand laminating of surf/sail boards. This resin is a
version containing UV stabilizer.
TYPICAL RESIN PROPERTIES @ 77 F RESULTS
Brookfield Viscosity @ 20 rpm 400 550
Brookfield Spindle No. (RVF
Catalyst %, DDM-9 [| t00
Gel Time _ minutes:seconds 11:00 19:00
Gel to Peak_minutes:seconds 12:00 23:00
Peak Exotherm F 265 305
Solids % 61.5 64.5
those given above, Inerplase Corporation males no eprosenatons fl egarang tne mateal except ewe apectid above No INTERPLASTIC CORPORATION
person has any authority to bind Interplastic Corporation to any representation except those specified above. Final determination of the 3535 Latonia Avenue
Euilablty ofthe material forthe use contemplated is the sole responsibilty ofthe Buyer. The Thermoset Resins Divisions technical sales Fort Wright, KY 41015-0159
representatives will assist in developing procedures to ft individual requirements.
859.292.7400 Fax: 859.292.7424
Revised: 7/06 www.interplastic.com
(800) 281-4975
sales@revchem.com
