23QT002-30_TDS.pdf

9411 Corsair Road
Revised Frankfort, IL 60423
vise
May 1, 2012 1-800-552-0299 Phone
FIP 1-815-464-5650 Fax
Adhesive Systems, Inc.
EMERGENCY PHONE 1-800- 255-3924
Description:
Quick Tac Accelerators have been developed as a treating agent for use with the ADVANCED
PERFORMANCE family of instant adhesive products. If faster setting speeds are desired,QUICK
TAC will aid the curing process and give exceptionally faster set times. When curing beads or in
applicationswhere the adhesive is not between two parts, it will allow for faster uniform curing.
QUICK TAC will aid the bonding of porous materials such as fabrics or woods. It is useful when
bonding acidic surfaces or in low humidity conditions promoting consistent curing times. Ideal
for wire tacking, silk screening, or in loudspeaker assembly. Using QUICK TAC will enable the
adhesive to fill gaps up to 0.20″. QUICK TAC can be applied by brushing or spraying.
General Properties:
Quick Tae: 2 3 4 5 6
Specific Gravity: 0.79 0.79 0.79 N.D. 0.76
Vapor Density: N.D. N.D. N.D. 43 N.D.
Boiling Point: 133 F 180-181 F >=195 F 68 C 347-387 F
Flash Point: <0 F 53 F 15 F NONE 120 F Color: wenn cee cneen ene nnn ene en ene enenneeneneene=CLEAR/AM BER --------2nnnnennnnnnnnncennn nce nneee Viscosity: 3 cps 3 cps 3 cps 3 cps 3 cps Solvent Base: Acetone Isopropanol Heptane N-Propyl Bromide Mineral Spirits Shelf Life: -----Twelve months in original sealed container when properly stored.----- NON- WARRANTY: Information contained herein is based on tests we believe to be reliable and accurate. It is offered in good faith for the benefit of the consumer. Adhesive Systems shall not be liable for any injury, loss, or damage in the use of it's chemical products since the conditions of use are beyond our control. In every case we urge and recommend the user conduct tests to determine to their own satisfaction that the product is of acceptable quality and is suitable for their particular purpose under their own operating conditions. Statements concerning the possible use of our products are not intended as recommendations to use our products in the infringement of any patent. Because of changing reporting requirements and other variables it is impossible to guarantee the accuracy of the information contained in this document. It is the responsibility of the user to determine proper personal protection based on the actual condition of use and to comply with all Federal, State, and Local laws and regulations. Engineering Excellence For technical information and support call 1-800-552-0299 oF visit our website at .instantca. Page 1 of 1