5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet WRIGHTLON 4600
Cost effective polyolefin copolymer release film
lM DESCRIPTION
Wrightlon 4600 release film is a low cost high temperature film for use in flat or limited curvature molding
applications up to 380 F (193 C). It will release from epoxy and phenolic resin systems. All standard perforations are
available. Please see our perforation table in this section.
@ BENEFITS
+ Inexpensive film reduces the cost of high temperature vacuum bagging process.
+ Flat film can be applied quickly and without wrinkles over simple tooling and part shapes.
+ Highly visible colour reduces risk of leaving film on cured parts.
M@ TECHNICAL DATA
Test method
Material type PMP.
Elongation at break 250% ASTM D 882
Tensile strength 3400 psi (23 MPa) ASTM D 882
Maximum use temperature 193 C (380 F)
Materials to avoid Polyester and vinyl ester resins
Colour Blue/Clear
Shelf life Unlimited when stored in original packaging at 22 C (72 F)
SIZES
Forms Available
0.0015 inch (38 ym) up to 120 inches (3.05 m) SHT, CF
0.002 inch (50 um) up to 54 inches (1.37 m) SHT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
*SHT=Sheeting CF=Centerfold
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2024-05-22
Catalog position : Release films
ste conditions ceo ue nding sarge beyond ot cota itech tration oe ese pony for the peronnnce fh mate fr ry arr. The mates sols Artech inten ne 4
(800) 281-4975
sales@revchem.com
