5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF Ls CA 92647 USA
INTERNATIONAL INC.
Data Sheet VAC-BRAKE PRO
Combination no-bleed Vacuum manifold & Resin break
lM DESCRIPTION
Vac-Brake Pro is a combination vacuum manifold and resin brake for the periphery of resin infusion moldings. Vac-
Brake Pro features a spiral tube sewn into a Dahltexx sleeve then assembled into a PP200 resin brake. Positioned
around the edge of the part it distributes even vacuum and provides a resin brake preventing resin waste and choking
of the vacuum manifold.
M@ BENEFITS
+ Simplify infusion setup, saving time and avoiding errors.
+ Reduce resin waste in manifolds and catch pots.
+ Avoid lost vacuum slowing infusion progress.
@ TECHNICAL DATA
Material type PP Textile and PE Spiral tube
Maximum use temperature 250 F (121 C)
Shelf life Unlimited when stored in original packaging at 72 F
(22 C)
SIZES
Product Reference
Vac-Brake Pro 4 inches (10.2 cm) 82 feet (25 m) Troll
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ For best results remove Vac-Brake Pro while the laminate is still “green” or within 24 hours.
Last updated : 2023-06-28
Catalog position : Resin infusion products