5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtechintl.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtechonline.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet TEFLEASE MG2
High temperature PTFE pressure sensitive tape
DESCRIPTION
Teflease MG2 is a PTFE film coated with a silicone adhesive. Teflease MG tapes will release from most resin
systems. They are ideal for use on tooling blocks and all areas where high elongation and release is needed.
Teflease MG tapes will form to critical contours and mold surfaces while offering multiple releases or may be
used to cover multiple detail mold seams. They provide a semi-permanent release on cured Airpad tooling
rubber and Aircast 3700 pressure intensifiers and mandrels.
@ BENEFITS
+ Provides semi-permanent release and superior surface finish, saving time and improving quality.
+ Protect rubber tooling mandrels and intensifiers from resin attack, extending tool life and reducing cost.
+ Good elongation makes application to complex shapes easier, reducing time and improving quality.
@ TECHNICAL DATA
Maximum use temperature 500 F (260 C)
Carrier type PTFE
Adhesive type Silicone
Color Light brown
Total thickness 0.0035 inch (88 1m)
Film thickness 0.002 inch (50 jum)
Adhesive thickness 0.0015 inch (38 pm)
Elongation at break 125 %
Shelf life 18 months from date of shipment when
stored in original packaging at 72 F (22 C)
COMMONLY USED SIZES
1 inch (2.54 cm) 36 yards (33 m) 60 rolls per case
2 inches (5.08 cm) 36 yards (33 m) 30 rolls per case
+ Broken cases and other widths available on special order.
+ Other thickness available:
MG3 – 0.0045 inch (115 tm) total thickness
MG5 – 0.0065 inch (165 tm) total thickness
@ NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2019-10-07
Catalog position : Pressure sensitive tapes
-Asthecondton or methods fuse, lncluing storage ae beyond our control Altech tration nc does ot sume any espns fe the performance of his material for any parca ue. The mater sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
(800) 281-4975
sales@revchem.com
