a ae a aaa aaa aa aaaaaaaaaaaaaaaaaaaaacacaaasaaaaaama aaa aaa
Richmond
Aircraft Products
TECHNICAL DATA 3/24/2008
Oriented Polyester Tape
DESCRIPTION:
SHRINK TAPE II is an oriented polyester tape designed to shrink during the cure cycle and apply pressure to the
composite lay-up or adhesive bond. ] |
|
|
APPLICATION: |
SHRINK TAPE II is normally wrapped over the laminate on the mold with pressure sensitive tape put in place to
prevent movement during cure, The assembly is then exposed to heat and the SHRINK TAPE II begins applying
pressure (onset of shrink) at 175 F (79 C) with maximum shrinkage at 400 F (205 C). SHRINK TAPE II is
available with or without perforations or release agent coating.
PHYSICAL PROPERTIES:
Roll width: 1.25″ and 2.50″ 3.17 cm & 6.33 cm
Roll length: 100 yards. 91.4m
Shrinkage: 20 % maximum
Onset 175 F 79 C
Maximum use temperature: 400 F 205 C
Other widths are available.
NOTE: DATA PROVIDED IS FOR INFORMATION ONLY AND DOES NOT CONSTITUTE ANY WARRANTY FOR THE PRODUCT. AS THE CONDITIONS AND VARYING
METHODS OF USE ARE BEYOND OUR CONTROL, RICHMOND AIRCRAFT PRODUCTS, INC. SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL,
(OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE, OR INABILITY
TO USE THESE MATERIALS. THESE MATERIALS ARE PROVIDED AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
13503 Pumice Street, Norwalk, California 90650 – TEL 562-404-2440 – FAX 562-404-9011
117
(800) 281-4975
sales@revchem.com
