37WAX18720P_SDS.pdf

SAFETY DATA SHEET
1: Identification
Product identifier Liquid Mold Release (187X20)
Other means of identification
Product code 187X20
Recommended use Industrial use mold release
Recommended restrictions None
Manufacturer/Importer/Supplier/Distributor Information
Company name Mar-Kote Products, LLC
Address 15211 N Turquoise Cir
Chino Hills, CA 91709
United States
Telephone (809) 553-4236
Emergency telephone CHEMTREC (800) 424-9300
CHEMTREC International: 00 1-703-527-3887
2: Hazard(s) identification
Classification
Specific target organ toxicity (single exposure) Category 3
Specific target organ toxicity (repeated exposure) Category 4
Skin Irritation Category 2
Aspiration toxicity Category 1
Flammable liquids Category 2
Label elements
Signal word Danger
Hazard Statement
Highly Flammable liquid and vapor
May cause drowsiness or dizziness
Causes skin irritation
May be fatal if swallowed and enters airways
May cause damage to organs through prolonged or repeated exposure
Prevention
Do not breathe dust/fume/gas/mist/vapors/spray. Wash face, hands and any exposed skin thoroughly after handling. Do not eat, drink
or smoke when using this product. Use only outdoors or in a well-ventilated area, P210 – Keep away from heat/sparks/open flames/
hot surfaces. – No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof
electrical/ ventilating/ lighting/ equipment. Use only non-sparking tools. Take precautionary measures against static
discharge. Wear protective gloves/protective clothing/eye protection/face protection.
Response
Get medical advice/attention if you feel unwell.
Eyes
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue
tinsing. If eye irritation persists: Get medical advice/attention.
Skin
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower.
inhalation
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor/physician if
you feel unwell.
Ingestion
IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Do NOT induce vomiting.
Fire
In case of fire: Use CO2, dry chemical, or foam for extinction.
187X20 Liquid Mold Release SDS
Issue date: 12-December-2023 117