37WA138_SDS.pdf

IR
Lm, Induyiton
weiner
coin Ro,
1, Identification
Product identifier 905 TR Mold Prep Cleaner
Other means of identification
Product code TR 905
Recommended use Solvent.
Recommended restrictions Use in accordance with supplier’s recommendations.
Manufacturer/Importer/Supplier/Distributor information
Manufacturer/Supplier TR Industries a Division of Granitize Products Inc.
Address 11022 Vulcan Street
South Gate, CA 90280-0893 United States
Telephone: (562) 923-5438
Emergency CHEMTREC: (800) 424-9300
CHEMTREC International: 00 1-703-527-3887
2. Hazard(s) identification
Physical hazards Flammable liquids Category 2
Health hazards Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 2B
Reproductive toxicity Category 2
Specific target organ toxicity, single exposure Category 3 narcotic effects
Specific target organ toxicity, repeated Category 2 (Central nervous system)
exposure
Aspiration hazard Category 1
OSHA defined hazards Not classified.
Label elements
Signal word Danger
Hazard statement Highly flammable liquid and vapor. Causes skin irritation. Causes eye irritation. Suspected of
damaging fertility or the unborn child. May cause drowsiness or dizziness. May cause damage to
organs (Central nervous system) through prolonged or repeated exposure. May be fatal if
swallowed and enters airways.
Precautionary statement
Prevention Obtain special instructions before use. Do not handle until all safety precautions have been read
and understood. Keep away from heat/sparks/open flames/hot surfaces. – No smoking. Keep
container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof
electrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionary
measures against static discharge. Do not breathe mist or vapor. Wash thoroughly after handling.
Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye
protection/face protection.
Response If swallowed: Immediately call a poison center/doctor. Do NOT induce vomiting. If on skin (or hair):
Take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation
occurs; Get medical advice/attention. Wash contaminated clothing before reuse. If inhaled:
Remove person to fresh air and keep comfortable for breathing. Call a poison center/doctor if you
feel unwell. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, If
present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If
exposed or concerned: Get medical advice/attention. In case of fire: Use water, water spray,
foam, dry powder, carbon dioxide (CO2) to extinguish,
905 TR Mold Prep Cleaner SDS US
913171 Version #:02 Revision date: 18-December-2015 _ Issue date: 10-April-2014 1/8