17E497_SDS.pdf

Safety Data Sheet
E497 Thermoset Mold Release
Copying and/or downloading of this information for the purpose of properly utilizing Stoner Inc. product is allowed provided that: (1) the
information is copied in full with no changes unless prior agreement is obtained from Stoner Inc., & (2) neither the copy nor the original is
resold or otherwise distributed with intention of earning profit thereon.
fl. IDENTIFICATION
[Stoner Incorporated Product Name: Thermoset Mold Release
1070 Robert Fulton Hwy. Product Code: E497
Quarryville, PA 17566 Product Use: Mold Release
1-800-227-5538 24-hour emergency phone: 1-800-424-9300 [CHEMTREC]
b. HAZARD IDENTIFICATION
POTENTIAL HEALTH EFFECTS
Classification of the chemical in accordance with paragraph (d) of 1910.1200;
GHS Hazard Symbols ‘
GHS Classification Flammable Aerosol Category 1
Gases under pressure – Liquified Gas
Skin Corrosion/Irritation Category 2
Specific Target Organ Systemic Toxicity (STOT) – Single Exposure Category 3
Signal Word Danger
Hazard Statements Extremely flammable aerosol.
Contains gas under pressure; may explode if heated.
Causes skin irritation.
May cause drowsiness or dizziness.
Precautionary Statements
Prevention Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Do not spray on an open flame or other ignition source.
Pressurized container: Do not pierce or burn, even after use.
Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 – Wash thoroughly after handling.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
Response P302+P352 – If on skin: Wash with plenty of soap and water.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P312 – Call a poison center, doctor or medical center if you feel unwell.
P321 – Specific treatment (see on this SDS).
If skin irritation occurs: Get medical advice/attention.
Storage Store in a well-ventilated place. Keep container tightly closed.
Store locked up.
Protect from sunlight. Store in a well-ventilated place.
Protect from sunlight. Do no expose to temperatures exceeding 50 C/ 12 F.
Disposal Dispose of contents/container in accordance with local/regional/national/international regulation for hazardous
Bb. COMPOSITION/INFORMATION ON INGREDIENTS
COMPONENT CAS # Percent
Petroleum distillates 64741-65-7 60-80
Ether propellant 115-10-6 1-20
Hydrocarbon propellant 68476-86-8 1-20
Stoner Incorporated E497 PAGE 1